As long as what you are looking for is high quality and accuracy practice materials, then our 350-401 Free Dumps training guide is your indispensable choices. We are sufficiently definite of the accuracy and authority of our 350-401 Free Dumps practice materials. So lousy materials will lead you end up in failure. We have an authoritative production team, after you purchase 350-401 Free Dumps study materials, our professions can consolidate important knowledge points for you, and we guarantee that your 350-401 Free Dumps practice quiz is tailor-made. The last but not least, we can provide you with a free trial service, so that customers can fully understand our format before purchasing our 350-401 Free Dumps training guide, which can be an unparalleled trial experience compared to other counterparts. The language of our 350-401 Free Dumps study torrent is easy to be understood and the content has simplified the important information.
CCNP Enterprise 350-401 And the quality of our exam dumps are very high!
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Dumps study braindumps can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned. What the certificate main? All kinds of the test 350-401 Exam Papers certification, prove you through all kinds of qualification certificate, it is not hard to find, more and more people are willing to invest time and effort on the 350-401 Exam Papers exam guide, because get the test 350-401 Exam Papers certification is not an easy thing, so, a lot of people are looking for an efficient learning method. And here, fortunately, you have found the 350-401 Exam Papers exam braindumps, a learning platform that can bring you unexpected experiences.
So you will definitely feel it is your fortune to buy our 350-401 Free Dumps exam guide question. If you buy our 350-401 Free Dumps exam dump you odds to pass the test will definitely increase greatly. Now we want to introduce you our 350-401 Free Dumps study guide in several aspects in detail as follow.
Passing Cisco 350-401 Free Dumps exam can help you find the ideal job.
A generally accepted view on society is only the professionals engaged in professionally work, and so on, only professional in accordance with professional standards of study materials, as our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions, to bring more professional quality service for the user. Our study materials can give the user confidence and strongly rely on feeling, lets the user in the reference appendix not alone on the road, because we are to accompany the examinee on 350-401 Free Dumps exam, candidates need to not only learning content of teaching, but also share his arduous difficult helper, so believe us, we are so professional company.
However, our 350-401 Free Dumps training materials can offer better condition than traditional practice materials and can be used effectively. We treat it as our major responsibility to offer help so our 350-401 Free Dumps practice guide can provide so much help, the most typical one is their efficiency.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our company has hired the best team of experts to create the best IBM C1000-201 exam questions for you. All precise information on the Microsoft AZ-104-KR exam questions and high accurate questions are helpful. Microsoft AZ-305 training materials can help you achieve this goal faster. So you can master the most important Microsoft DP-300 exam torrent in the shortest time and finally pass the exam successfully. With “reliable credit” as the soul of our HashiCorp Terraform-Associate-003 study tool, “utmost service consciousness” as the management philosophy, we endeavor to provide customers with high quality service.
Updated: May 28, 2022