And you will find that the coming exam is just a piece of cake in front of you. By selecting our 350-401 Key Concepts study materials, you do not need to purchase any other products. Our passing rate may be the most attractive factor for you. So there is no matter of course. Among a multitude of 350-401 Key Concepts practice materials in the market, you can find that our 350-401 Key Concepts exam questions are the best with its high-quality and get a whole package of help as well as the best quality 350-401 Key Concepts study materials from our services. Go against the water and retreat if you fail to enter.
CCNP Enterprise 350-401 In short, we live in an age full of challenges.
CCNP Enterprise 350-401 Key Concepts - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) All knowledge is based on the real exam by the help of experts. We believe that you must have paid more attention to the pass rate of the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions. If you focus on the study materials from our company, you will find that the pass rate of our products is higher than other study materials in the market, yes, we have a 99% pass rate, which means if you take our the Valid 350-401 Exam Objectives study dump into consideration, it is very possible for you to pass your exam and get the related certification.
Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. As the authoritative provider of 350-401 Key Concepts test guide, we always pursue high passing rates compared with our peers to gain more attention from potential customers. In order to gain the trust of new customers, 350-401 Key Concepts practice materials provide 100% pass rate guarantee for all purchasers.
Cisco 350-401 Key Concepts - As well as our after-sales services.
before making a choice, you can download a trial version of 350-401 Key Concepts preparation materials. After you use it, you will have a more complete understanding of this 350-401 Key Concepts exam questions. In this way, you can use our 350-401 Key Concepts study materials in a way that suits your needs and professional opinions. We hope you will have a great experience with 350-401 Key Concepts preparation materials. At the same time, we also hope that you can realize your dreams with our help. We will be honored.
As we all know, a lot of efforts need to be made to develop a 350-401 Key Concepts learning prep. Firstly, a huge amount of first hand materials are essential, which influences the quality of the compilation about the 350-401 Key Concepts actual test guide.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Databricks Databricks-Certified-Professional-Data-Engineer - I believe that you must have your own opinions and requirements in terms of learning. Huawei H19-338-ENU - If you are interested in our products, I believe that after your trial, you will certainly not hesitate to buy it. Oracle 1z1-809 - We firmly believe that you cannot be an exception. Adobe AD0-E608-KR - Therefore, our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent is attributive to high-efficient learning. Lpi 101-500 - Of course, you can also experience it yourself.
Updated: May 28, 2022