Our 350-401 Lab Questions guide questions are motivating materials especially suitable for those exam candidates who are eager to pass the exam with efficiency. And we can claim that with our 350-401 Lab Questions study braindumps for 20 to 30 hours, you will be bound to pass the exam. The more you practice with our 350-401 Lab Questions simulating exam, the more compelling you may feel. Our staff made great efforts to ensure that you always get good grades in examinations. To be sure, Goldmile-Infobiz Cisco 350-401 Lab Questions exam materials can provide you with the most practical IT certification material. Experts conducted detailed analysis of important test sites according to the examination outline, and made appropriate omissions for unimportant test sites.
CCNP Enterprise 350-401 With it, you will get a different life.
CCNP Enterprise 350-401 Lab Questions - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Continuous improvement is a good thing. With this certification you will not be eliminated, and you will be a raise. Some people say that to pass the Cisco 350-401 Exam Dump exam certification is tantamount to success.
Our 350-401 Lab Questions study materials are written by experienced experts in the industry, so we can guarantee its quality and efficiency. The content of our 350-401 Lab Questions learning guide is consistent with the proposition law all the time. We can't say it’s the best reference, but we're sure it won't disappoint you.
Cisco 350-401 Lab Questions - So, it can save much time for us.
Our 350-401 Lab Questions study guide is carefully edited and reviewed by our experts. The design of the content conforms to the examination outline and its key points. Through the practice of our 350-401 Lab Questions exam questions, you can grasp the intention of the examination organization accurately. And we also have the Software version of our 350-401 Lab Questions learning materials that can simulate the real exam which can help you better adapt to the real exam.
This is because IT experts can master the question point well, so that all questions the candidates may come across in the actual test are included in Goldmile-Infobiz exam dumps. Is it amazing? But it is true.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In addition, the passing rate of our WGU Web-Development-Applications study materials is very high, and we are very confident to ensure your success. And then are what materials your worthwhile option? Do you have chosen Goldmile-Infobiz Cisco SAP C-S4CS-2508 real questions and answers? If so, you don't need to worry about the problem that can't pass the exam. SAP C_ARCIG_2508 - In order to meet the demands of all people, these excellent experts and professors from our company have been working day and night. EMC D-VXR-DS-00 - So what we can do is to help you not waste your efforts on the exam preparation. SAP C_TS422_2504 - Free demos are understandable materials as well as the newest information for your practice.
Updated: May 28, 2022