Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. Goldmile-Infobiz's Cisco 350-401 Learning Cram exam training materials are the best training materials for this exam. It is unquestionable necessary for you to have an initial look of them before buying any. They are some brief introductions and basic information but also impressive. I believe that you must think so.
CCNP Enterprise 350-401 Don't hesitate.
CCNP Enterprise 350-401 Learning Cram - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Actually, you must not impoverish your ambition. The exam software with such guarantees will clear your worries about 350-401 Certification Cost exam. It is no longer an accident for you to pass 350-401 Certification Cost exam after you have use our 350-401 Certification Cost exam software.
During the prolonged review, many exam candidates feel wondering attention is hard to focus. But our 350-401 Learning Cram real exam is high efficient which can pass the 350-401 Learning Cram exam during a week. To prevent you from promiscuous state, we arranged our 350-401 Learning Cram learning materials with clear parts of knowledge.
Cisco 350-401 Learning Cram - They will mitigate your chance of losing.
We are equipped with excellent materials covering most of knowledge points of 350-401 Learning Cram pdf torrent. Our learning materials in PDF format are designed with 350-401 Learning Cram actual test and the current exam information. Questions and answers are available to download immediately after you purchased our 350-401 Learning Cram dumps pdf. The free demo of pdf version can be downloaded in our exam page.
Once you unfortunately fail the exam, we will give you a full refund, and our refund process is very simple. We provide 24-hour online service for all customers who have purchased 350-401 Learning Cram test guide.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
If you click PayPal payment, it will automatically transfer to credit card payment for Amazon AWS-Certified-Developer-Associate-KR exam test engine. Most people may wish to use the shortest time to prepare for the test and then pass the test with our WGU Managing-Cloud-Security study materials successfully because they have to spend their most time and energy on their jobs, learning, family lives and other important things. Our goal is ensure you get high passing score in the DSCI DCPLA practice exam with less effort and less time. We can make sure that our GIAC GCIH study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. Now, please take Cisco 700-242 practice torrent as your study material, and pass with it successfully.
Updated: May 28, 2022