No matter how good the product is users will encounter some difficult problems in the process of use, and how to deal with these problems quickly becomes a standard to test the level of product service. Our 350-401 Learning Materials real exam materials are not exceptional also, in order to enjoy the best product experience, as long as the user is in use process found any problem, can timely feedback to us, for the first time you check our 350-401 Learning Materials exam question performance, professional maintenance staff to help users solve problems. Our 350-401 Learning Materials learning reference files have a high efficient product maintenance team, a professional staff every day real-time monitoring the use of the user environment and learning platform security, even in the incubation period, we can accurate solution for the user, for the use of the user to create a safer environment. In fact, we always will unconsciously score of high and low to measure a person's level of strength, believe that we have experienced as a child by elders inquire achievement feeling, now, we still need to face the fact. Our society needs all kinds of comprehensive talents, the 350-401 Learning Materials latest dumps can give you what you want, but not just some boring book knowledge, but flexible use of combination with the social practice. 350-401 Learning Materials practice guide has such effects because they have a lot of advantages.
CCNP Enterprise 350-401 They will help you 24/7 all the time.
The high quality product like our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Learning Materials study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. We have free demos of our Instant 350-401 Discount exam questions for your information and the demos offer details of real exam contents. All contents of Instant 350-401 Discount practice quiz contain what need to be mastered.
You will find the exam is a piece of cake with the help of our 350-401 Learning Materials study materials. Being anxious for the 350-401 Learning Materials exam ahead of you? Have a look of our 350-401 Learning Materials training engine please. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 350-401 Learning Materials learning questions, and it is their job to officiate the routines of offering help for you.
Cisco 350-401 Learning Materials - It can maximize the efficiency of your work.
As is known to us, there are best sale and after-sale service of the 350-401 Learning Materials study materials all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 350-401 Learning Materials study materials for all customers. More importantly, it is evident to all that the 350-401 Learning Materials study materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the 350-401 Learning Materials exam and get the related certification in the shortest time, choosing the 350-401 Learning Materials study materials from our company will be in the best interests of all people. We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination.
With Goldmile-Infobiz's Cisco 350-401 Learning Materials exam training materials you can pass the Cisco 350-401 Learning Materials exam easily. The training tools which designed by our website can help you pass the exam the first time.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
Amazon SAP-C02-KR - So just open our websites in your computer. Fortinet FCSS_NST_SE-7.4 - It not only can help you to pass the exam , you can also improve your knowledge and skills. Snowflake SOL-C01 - You can find their real comments in the comments sections. PRINCE2 PRINCE2-Foundation - Dreams and hopes are important, but more important is to go to practice and prove. ACAMS CAMS7-KR - Many people always are stopped by the difficult questions.
Updated: May 28, 2022