With our 350-401 Objectives Pdf learning questions, you can enjoy a lot of advantages over the other exam providers’. The most attraction aspect is that our high pass rate of our 350-401 Objectives Pdf study materials as 98% to 100%. I believe every candidate wants to buy 350-401 Objectives Pdf learning bbraindumps that with a high pass rate, because the data show at least two parts of the 350-401 Objectives Pdf exam guide, the quality and the validity which are the pass guarantee to our candidates. There are many advantages of our 350-401 Objectives Pdf question torrent that we are happy to introduce you and you can pass the exam for sure. According to different kinds of questionnaires based on study condition among different age groups, we have drawn a conclusion that the majority learners have the same problems to a large extend, that is low-efficiency, low-productivity, and lack of plan and periodicity. Time and tide wait for no man, if you want to save time, please try to use our 350-401 Objectives Pdf preparation exam, it will cherish every minute of you and it will help you to create your life value.
CCNP Enterprise 350-401 Then join our preparation kit.
CCNP Enterprise 350-401 Objectives Pdf - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) We can send you a link within 5 to 10 minutes after your payment. What most useful is that PDF format of our Latest Test 350-401 Lab Questions exam materials can be printed easily, you can learn it everywhere and every time you like. It is really convenient for candidates who are busy to prepare the exam.
Among the three versions, the PDF version of 350-401 Objectives Pdf training guide is specially provided for these candidates, because it supports download and printing.For those who are willing to learn on the phone, as long as you have a browser installed on your phone, you can use the App version of our 350-401 Objectives Pdf exam questions. The PC version is ideal for computers with windows systems, which can simulate a real test environment. There are also the Value pack of our 350-401 Objectives Pdf study materials for you to purchase.
Cisco 350-401 Objectives Pdf - Also, they have respect advantages.
Goldmile-Infobiz is an excellent IT certification examination information website. In Goldmile-Infobiz you can find exam tips and materials about Cisco certification 350-401 Objectives Pdf exam. You can also free download part of examination questions and answers about Cisco 350-401 Objectives Pdf in Goldmile-Infobiz. Goldmile-Infobiz will timely provide you free updates about Cisco 350-401 Objectives Pdf exam materials. Besides, the exam materials we sold are to provide the answers. Our IT experts team will continue to take advantage of professional experience to come up with accurate and detailed exam practice questions to help you pass the exam. In short, we will provide you with everything you need about Cisco certification 350-401 Objectives Pdf exam.
However, how to pass Cisco certification 350-401 Objectives Pdf exam quickly and simply? Our Goldmile-Infobiz can always help you solve this problem quickly. In Goldmile-Infobiz we provide the 350-401 Objectives Pdf certification exam training tools to help you pass the exam successfully.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Huawei H21-111_V2.0 - Goldmile-Infobiz have a huge senior IT expert team. Linux Foundation CNPA - Through so many feedbacks of these products, our Goldmile-Infobiz products prove to be trusted. Huawei H13-922_V2.0 - Now please add Goldmile-Infobiz to your shopping cart. Juniper JN0-105 - If you fail to pass the exam, Goldmile-Infobiz will full refund to you. Although Cisco certification Fortinet FCSS_NST_SE-7.4 exam is difficult, through doing Goldmile-Infobiz's exercises you will be very confident for the exam.
Updated: May 28, 2022