350-401 Original Questions exam is a very important Cisco's certification exam. But if you want to get a Cisco certification, you must pass the exam. Now there are many IT professionals in the world and the competition of IT industry is very fierce. Our 350-401 Original Questions practice engine can offer you the most professional guidance, which is helpful for your gaining the certificate. And our 350-401 Original Questions learning guide contains the most useful content and keypoints which will come up in the real exam. Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Cisco certification 350-401 Original Questions exam.
350-401 Original Questions actual test guide is your best choice.
CCNP Enterprise 350-401 Original Questions - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) If you are a person who desire to move ahead in the career with informed choice, then the Cisco training material is quite beneficial for you. Not only our Exam 350-401 Questions Answers study materials contain the latest exam questions and answers, but also the pass rate is high as 98% to 100%. Success does not come only from the future, but it continues to accumulate from the moment you decide to do it.
Our website is here to lead you toward the way of success in 350-401 Original Questions certification exams and saves you from the unnecessary preparation materials. The latest 350-401 Original Questions dumps torrent are developed to facilitate our candidates and to improve their ability and expertise for the challenge of the actual test. We aimed to help our candidates get success in the 350-401 Original Questions practice test with less time and leas effort.
Cisco 350-401 Original Questions - You will never come across system crashes.
Long time learning might makes your attention wondering but our effective 350-401 Original Questions study materials help you learn more in limited time with concentrated mind. Just visualize the feeling of achieving success by using our 350-401 Original Questions exam guide,so you can easily understand the importance of choosing a high quality and accuracy 350-401 Original Questions training engine. You will have handsome salary get higher chance of winning and separate the average from a long distance and so on.
Please check it carefully. If you need the invoice, please contact our online workers.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Unlike some products priced heavily and too heavy to undertake, our SAP C-TS422-2504 practice materials are reasonable in price. Microsoft AZ-305-KR - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. We can make sure the short time on Huawei H12-611_V2.0 training engine is enough for you to achieve the most outstanding result. We can be sure that with the professional help of our SAP C_TS4FI_2023 test guide you will surely get a very good experience. ITIL ITIL-4-Foundation - It is a truth well-known to all around the world that no pains and no gains.
Updated: May 28, 2022