As long as our 350-401 Positive Feedback learning material updated, users will receive the most recent information from our 350-401 Positive Feedback learning materials. So, buy our products immediately! To meet the needs of users, and to keep up with the trend of the examination outline, our products will provide customers with larest version of our products. A lot of things can’t be tried before buying or the product trail will charge a certain fee, but our 350-401 Positive Feedback exam questions are very different, you can try it free before you buy it. It’s like buying clothes, you only know if it is right for you when you try it on. By visit our website, the user can obtain an experimental demonstration, free after the user experience can choose the most appropriate and most favorite 350-401 Positive Feedback exam questions download.
CCNP Enterprise 350-401 You will become friends with better people.
CCNP Enterprise 350-401 Positive Feedback - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) In addition, there are three different versions for all people to choose. Every day they are on duty to check for updates of 350-401 Exam Outline study materials for providing timely application. We also welcome the suggestions from our customers, as long as our clients propose rationally.
Currently, my company has introduced a variety of learning materials, covering almost all the official certification of qualification exams, and each 350-401 Positive Feedback practice dump in our online store before the listing, are subject to stringent quality checks within the company. Thus, users do not have to worry about such trivial issues as typesetting and proofreading, just focus on spending the most practice to use our {CertName} test materials. After careful preparation, I believe you will be able to pass the exam.
Cisco 350-401 Positive Feedback - No one will laugh at a hardworking person.
It is of no exaggeration to say that sometimes a certification is exactly a stepping-stone to success, especially when you are hunting for a job. The 350-401 Positive Feedback study materials are of great help in this sense. People with initiative and drive all want to get a good job, and if someone already gets one, he or she will push for better position and higher salaries. With the 350-401 Positive Feedback test training, you can both have the confidence and gumption to ask for better treatment. To earn such a material, you can spend some time to study our 350-401 Positive Feedback study torrent. No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one.
Once you have used our 350-401 Positive Feedback exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 350-401 Positive Feedback exam training at your own right. Our 350-401 Positive Feedback exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 350-401 Positive Feedback test guide, you can enter the learning state.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
You can see our Network Appliance NS0-185 exam materials have three version, including PDf version, APP version and soft version, the PDf version support printing. If you want to use our Huawei H13-624_V5.5 simulating exam on your phone at any time, then APP version is your best choice as long as you have browsers on your phone. That is to download and use our Python Institute PCEP-30-02 study materials. If you want time - saving and efficient learning, our IIA IIA-CIA-Part2-CN exam questions are definitely your best choice. Cisco 300-835 - Our study materials have satisfied in PDF format which can certainly be retrieved on all the digital devices.
Updated: May 28, 2022