Our 350-401 Study Guide study materials can help you get the certificate easily. You must muster up the courage to challenge yourself. It is useless if you do not prepare well. There are three versions of our 350-401 Study Guide exam questions: PDF, Software and APP online which can provide you the varied study experiences. Our company has a professional team of experts to write 350-401 Study Guide preparation materials and will constantly update it to ensure that it is synchronized with the exam content. Our sales volumes are beyond your imagination.
CCNP Enterprise 350-401 I wish you good luck.
CCNP Enterprise 350-401 Study Guide - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Also, there will have no extra restrictions to your learning because different versions have different merits. Goldmile-Infobiz's latest training material about Cisco certification New Exam 350-401 Camp Free exam have 95% similarity with the real test. If you use Goldmile-Infobiz'straining program, you can 100% pass the exam.
There are a lot of advantages about the online version of the 350-401 Study Guide exam questions from our company. For instance, the online version can support any electronic equipment and it is not limited to all electronic equipment. More importantly, the online version of 350-401 Study Guide study practice dump from our company can run in an off-line state, it means that if you choose the online version, you can use the 350-401 Study Guide exam questions when you are in an off-line state.
Cisco 350-401 Study Guide - But pass this test will not be easy.
Our latest 350-401 Study Guide exam dump is comprehensive, covering all the learning content you need to pass the qualifying exams. Users with qualifying exams can easily access our web site, get their favorite latest 350-401 Study Guide study guide, and before downloading the data, users can also make a free demo for an accurate choice. Users can easily pass the exam by learning our 350-401 Study Guide practice materials, and can learn some new knowledge, is the so-called live to learn old. Believe in yourself, choosing the 350-401 Study Guide study guide is the wisest decision. So far, the 350-401 Study Guide practice materials have almost covered all the official test of useful materials, before our products on the Internet, all the study materials are subject to rigorous expert review, so you do not have to worry about quality problems of our latest 350-401 Study Guide exam dump, focus on the review pass the qualification exam. I believe that through these careful preparation, you will be able to pass the exam.
The training materials can help you pass the certification. Dear candidates, have you thought to participate in any Cisco 350-401 Study Guide exam training courses? In fact, you can take steps to pass the certification.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
And our Huawei H19-338-ENU learning prep can suit you most in this need for you will get the according certification as well as the latest information. Microsoft MB-500 - It is also the dream of ambitious IT professionals. Experts at HP HPE2-W12 practice prep also fully considered this point. ACAMS CAMS - You will encounter the complex questions in the exam, but Goldmile-Infobiz can help you to pass the exam easily. For there are three versions of SAP C-BCBAI-2509 learning materials and are not limited by the device.
Updated: May 28, 2022