350-401 Study Materials - Cisco New Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Test Preparation - Goldmile-Infobiz

Certainly you have heard of Goldmile-Infobiz Cisco 350-401 Study Materials dumps. But have you tried it? We often hear this, “Goldmile-Infobiz questions and answers are really good reference materials, thanks to the dumps, I pass my exam successfully.” Goldmile-Infobiz has been favourably commented by the people who used its questions and answers. This is because it can really help students to save a lot of time, and ensure that everyone pass the exam successfully. Once our customers pay successfully, we will check about your email address and other information to avoid any error, and send you the 350-401 Study Materials prep guide in 5-10 minutes, so you can get our 350-401 Study Materials exam questions at first time. And then you can start your study after downloading the 350-401 Study Materials exam questions in the email attachments. If you are unlucky to fail 350-401 Study Materials exam, we will give you a full refund of the cost you purchased our dump to make up part of your loss.

All the help provided by 350-401 Study Materials test prep is free.

You can instantly download the free trial of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Materials exam pdf and check its credibility before you decide to buy. All your dreams will be fully realized after you have obtained the Reliable 350-401 Test Questions Explanations certificate. Finding a good paying job is available for you.

Our test engine is an exam simulation that makes our candidates feel the atmosphere of 350-401 Study Materials actual test and face the difficulty of certification exam ahead. It reminds you of your mistakes when you practice 350-401 Study Materials vce dumps next time and you can set your test time like in the formal test. Our 350-401 Study Materials training materials cover the most content of the real exam and the accuracy of our 350-401 Study Materials test answers is 100% guaranteed.

Cisco 350-401 Study Materials - Moreover, there are a series of benefits for you.

Every day of our daily life seems to be the same rhythm, work to eat and sleep, and all the daily arrangements, the exam does not go through every day, especially for the key 350-401 Study Materials qualification test ready to be more common. In preparing the 350-401 Study Materials qualification examination, the 350-401 Study Materials study materials will provide users with the most important practice materials. Users can evaluate our products by downloading free demo templates prior to formal purchase.

To increase your chances of passing Cisco’s certification, we offer multiple formats for braindumps for all 350-401 Study Materials exams at Goldmile-Infobiz. However, since not all takers have the same learning styles, we devise a customizable module to suite your needs.

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

VMware 2V0-16.25 - Our company has authoritative experts and experienced team in related industry. So do not capitulate to difficulties, because we will resolve your problems of the Fortinet FCSS_SDW_AR-7.4 training materials. So, they are specified as one of the most successful Amazon DOP-C02-KR practice materials in the line. It is known to us that having a good job has been increasingly important for everyone in the rapidly developing world; it is known to us that getting a Fortinet FCSS_NST_SE-7.6 certification is becoming more and more difficult for us. And we have been in this career for over ten years, our Microsoft MB-800 learning guide is perfect.

Updated: May 28, 2022