The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate 350-401 Study Plan dumps torrent which are the best for passing certification test. It will help you to accelerate your knowledge and improve your professional ability by using our 350-401 Study Plan vce dumps. We provide the 350-401 Study Plan study materials which are easy to be mastered, professional expert team and first-rate service to make you get an easy and efficient learning and preparation for the 350-401 Study Plan test. Our product’s price is affordable and we provide the wonderful service before and after the sale to let you have a good understanding of our 350-401 Study Plan study materials before your purchase, you had better to have a try on our free demos. We provide our candidates with valid 350-401 Study Plan vce dumps and the most reliable pass guide for the certification exam.
CCNP Enterprise 350-401 As an old saying goes: Practice makes perfect.
Accurate 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Plan test answers are tested and verified by our professional experts with the high technical knowledge and rich experience. Our App online version of 350-401 Reliable Exam Dumps Demo study materials, it is developed on the basis of a web browser, as long as the user terminals on the browser, can realize the application which has applied by the 350-401 Reliable Exam Dumps Demo simulating materials of this learning model, users only need to open the App link, you can quickly open the learning content in real time in the ways of the 350-401 Reliable Exam Dumps Demo exam guide, can let users anytime, anywhere learning through our App, greatly improving the use value of our 350-401 Reliable Exam Dumps Demo exam prep.
You do not know what questions you may be faced with when attending the real test. Now, you need the 350-401 Study Plan practice dumps which can simulate the actual test to help you. Our 350-401 Study Plan training dumps can ensure you pass at first attempt.
Our Cisco 350-401 Study Plan exam questions have a lot of advantages.
Get the latest 350-401 Study Plan actual exam questions for 350-401 Study Plan Exam. You can practice the questions on practice software in simulated real 350-401 Study Plan exam scenario or you can use simple PDF format to go through all the real 350-401 Study Plan exam questions. Our products are better than all the cheap 350-401 Study Plan Exam braindumps you can find elsewhere, try free demo. You can pass your actual 350-401 Study Plan Exam in first attempt. Our 350-401 Study Plan exam material is good to pass the exam within a week. Goldmile-Infobiz is considered as the top preparation material seller for 350-401 Study Plan exam dumps, and inevitable to carry you the finest knowledge on 350-401 Study Plan exam certification syllabus contents.
But if you are unfortunate to fail in the exam we will refund you immediately in full and the process is very simple. If only you provide the scanning copy of the 350-401 Study Plan failure marks we will refund you immediately.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Our Cisco 350-401 practice dumps compiled by the most professional experts can offer you with high quality and accuracy practice materials for your success. If you want to get a better job and relieve your employment pressure, it is essential for you to get the SAP C_BCBAI_2509 certification. So are our The Open Group OGEA-101 exam braindumps! The sooner we can reply, the better for you to solve your doubts about ACFE CFE-Financial-Transactions-and-Fraud-Schemes training materials. There are so many advantages of our Scaled Agile SAFe-Agilist actual exam, and you are welcome to have a try!
Updated: May 28, 2022