They are in fact meant to provide you the opportunity to revise your learning and overcome your 350-401 Study Plan exam fear by repeating the practice tests as many times as you can. Preparation for 350-401 Study Plan exam using our 350-401 Study Plan exam materials are sure to help you obtain your targeted percentage too. Revision of your 350-401 Study Plan exam learning is as essential as the preparation. As you may know that we have three different 350-401 Study Plan exam questions which have different advantages for you to choose. 350-401 Study Plan practice prep broke the limitations of devices and networks. There is no another great way to pass the Cisco 350-401 Study Plan exam in the first attempt only by doing a selective study with valid 350-401 Study Plan braindumps.
CCNP Enterprise 350-401 People are engaged in modern society.
In order to allow our customers to better understand our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Plan quiz prep, we will provide clues for customers to download in order to understand our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Plan exam torrent in advance and see if our products are suitable for you. One of the great advantages is that you will soon get a feedback after you finish the exercises. So you are able to adjust your learning plan of the Reliable 350-401 Practice Questions Ppt guide test flexibly.
Some of our customers are white-collar workers with no time to waste, and need a Cisco certification urgently to get their promotions, meanwhile the other customers might aim at improving their skills. So we try to meet different requirements by setting different versions of our 350-401 Study Plan question dumps. The first one is online 350-401 Study Plan engine version.
Cisco 350-401 Study Plan exam prep look forward to meeting you.
Our passing rate is 98%-100% and there is little possibility for you to fail in the exam. But if you are unfortunately to fail in the exam we will refund you in full immediately. Some people worry that if they buy our 350-401 Study Plan exam questions they may fail in the exam and the procedure of the refund is complicated. But we guarantee to you if you fail in we will refund you in full immediately and the process is simple. If only you provide us the screenshot or the scanning copy of the 350-401 Study Plan failure marks we will refund you immediately. If you have doubts or other questions please contact us by emails or contact the online customer service and we will reply you and solve your problem as quickly as we can. So feel relieved when you buy our 350-401 Study Plan guide torrent.
Using 350-401 Study Plan exam prep is an important step for you to improve your soft power. I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Most experts agree that the best time to ask for more dough is after you feel your Fortinet FCSS_SASE_AD-24 performance has really stood out. If we update, we will provide you professional latest version of Fortinet FCSS_EFW_AD-7.6 dumps torrent as soon as possible, which means that you keep up with your latest knowledge in time. With the best reputation in the market our Salesforce MCE-Admn-201 training materials can help you ward off all unnecessary and useless materials and spend all your limited time on practicing most helpful questions. Our Juniper JN0-650 real exam try to ensure that every customer is satisfied, which can be embodied in the convenient and quick refund process. If you want to have an outline and brief understanding of our EMC D-SF-A-01 preparation materials we offer free demos for your reference.
Updated: May 28, 2022