You can totally relay on us. Many candidates do not have actual combat experience, for the qualification examination is the first time to attend, they always feel aimless and worried about the 350-401 Study Questions exam very much. But we can help all of these candidates on 350-401 Study Questions study questions. There are answers and questions provided to give an explicit explanation. We are sure to be at your service if you have any downloading problems. Second, it is convenient for you to read and make notes with our versions of 350-401 Study Questions exam materials.
The 350-401 Study Questions training materials are so very helpful.
If you want to enjoy the real exam environment, the software version will help you solve your problem, because the software version of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Questions test torrent can simulate the real exam environment. Our Cisco practice test software will give you a real exam environment with multiple learning tools that allow you to do a selective study and will help you to get the job that you are looking for. There are three effect versions of the date available for candidates who want to pass the 350-401 Certification Cost exam.
You can contact with our service, and they will give you the most professional guide. Our 350-401 Study Questions study materials are the accumulation of professional knowledge worthy practicing and remembering. There are so many specialists who join together and contribute to the success of our 350-401 Study Questions guide quiz just for your needs.
Cisco 350-401 Study Questions - You still can pass the exam with our help.
Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Cisco certification 350-401 Study Questions exam. Goldmile-Infobiz are able to provide you with test exercises which are closely similar with real exam questions.
And you can free download the demos of the 350-401 Study Questions practice engine to have a experience before payment. During the operation of the 350-401 Study Questions study materials on your computers, the running systems of the 350-401 Study Questions study guide will be flexible, which saves you a lot of troubles and help you concentrate on study.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
Goldmile-Infobiz provide a training scheme for Cisco certification SAP C-SIGVT-2506 exam, which only needs 20 hours to complete and can help you well consolidate the related IT professional knowledge to let you have a good preparation for your first time to participate in Cisco certification SAP C-SIGVT-2506 exam. If you decide to buy the SAP C-SIGPM-2403 reference materials from our company, we will have special people to advise and support you. Goldmile-Infobiz Cisco Huawei H19-489_V1.0 exam practice questions and answers is the practice test software. It means that if you do not persist in preparing for the IBM C1000-189 exam, you are doomed to failure. Huawei H25-611_V1.0 - It is the best training materials.
Updated: May 28, 2022