350-401 Technical Training - Cisco Reliable Test Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Questions Pdf - Goldmile-Infobiz

If you try on it, you will find that the operation systems of the 350-401 Technical Training exam questions we design have strong compatibility. So the running totally has no problem. And you can free download the demos of the 350-401 Technical Training practice engine to have a experience before payment. Cisco certification 350-401 Technical Training exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. In such a time is so precious society, time is money. Because it can help you prepare for the 350-401 Technical Training exam.

CCNP Enterprise 350-401 Our research materials have many advantages.

CCNP Enterprise 350-401 Technical Training - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Since it was founded, our Goldmile-Infobiz has more and more perfect system, more rich questiondumps, more payment security, and better customer service. You really can't find a more cost-effective product than 350-401 Latest Mock Test learning quiz! Our company wants more people to be able to use our products.

If you are looking for the latest updated questions and correct answers for Cisco 350-401 Technical Training exam, yes, you are in the right place. Our site is working on providing most helpful the real test questions answer in IT certification exams many years especially for 350-401 Technical Training. Good site provide 100% real test exam materials to help you clear exam surely.

Cisco 350-401 Technical Training - So their perfection is unquestionable.

Our 350-401 Technical Training practice engine with passing rate up to 98 percent can build a surely system to elude any kind of loss of you and help you harvest success effortlessly. We are in dire to help you conquer any questions about 350-401 Technical Training training materials emerging during your review. If you want to be accepted as an indispensable member in your working condition, and obliterate opponents from a great distance, start by using our 350-401 Technical Training exam prep to pass the 350-401 Technical Training exam now.

So you might worry about that the 350-401 Technical Training certification materials are not suitable for you. Try to believe us.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

IIA IIA-CIA-Part2 - You will have handsome salary get higher chance of winning and separate the average from a long distance and so on. You will receive the Microsoft MS-700 study materials no later than ten minutes. Unlike some products priced heavily and too heavy to undertake, our PRINCE2 P3O-Foundation practice materials are reasonable in price. What are you waiting for? Come and take SAP C-ARCIG-2508 preparation questions home. No matter the worker generation or students, they are busy in dealing with other affairs, so spending much time on a Microsoft MB-500 exam may make a disturb between their work and life.

Updated: May 28, 2022