Our company employs experts in many fields to write 350-401 Test Assessment study guide, so you can rest assured of the quality of our 350-401 Test Assessment learning materials. What’s more, preparing for the exam under the guidance of our 350-401 Test Assessment exam questions, you will give you more opportunities to be promoted and raise your salary in the near future. So when you are ready to take the exam, you can rely on our 350-401 Test Assessmentlearning materials! How to pass the 350-401 Test Assessment exam and gain a certificate successfully is of great importance to people who participate in the exam. Here our company can be your learning partner and try our best to help you to get success in the 350-401 Test Assessment exam. As long as what you are looking for is high quality and accuracy practice materials, then our 350-401 Test Assessment training guide is your indispensable choices.
CCNP Enterprise 350-401 And the quality of our exam dumps are very high!
CCNP Enterprise 350-401 Test Assessment - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) So there is all effective and central practice for you to prepare for your test. Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate. What the certificate main? All kinds of the test Latest 350-401 Exam Notes certification, prove you through all kinds of qualification certificate, it is not hard to find, more and more people are willing to invest time and effort on the Latest 350-401 Exam Notes exam guide, because get the test Latest 350-401 Exam Notes certification is not an easy thing, so, a lot of people are looking for an efficient learning method.
So you will definitely feel it is your fortune to buy our 350-401 Test Assessment exam guide question. If you buy our 350-401 Test Assessment exam dump you odds to pass the test will definitely increase greatly. Now we want to introduce you our 350-401 Test Assessment study guide in several aspects in detail as follow.
Cisco 350-401 Test Assessment - You may try it!
Our company is a well-known multinational company, has its own complete sales system and after-sales service worldwide. In the same trade at the same time, our 350-401 Test Assessment real study dumps have become a critically acclaimed enterprise, so, if you are preparing for the exam qualification and obtain the corresponding certificate, so our company launched 350-401 Test Assessment exam questions are the most reliable choice of you. The service tenet of our company and all the staff work mission is: through constant innovation and providing the best quality service, make the 350-401 Test Assessment question guide become the best customers electronic test study materials. No matter where you are, as long as you buy the 350-401 Test Assessment real study dumps, we will provide you with the most useful and efficient learning materials. As you can see, the advantages of our research materials are as follows.
Passing 350-401 Test Assessment exam can help you find the ideal job. If you buy our 350-401 Test Assessment test prep you will pass the exam easily and successfully，and you will realize you dream to find an ideal job and earn a high income.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
CheckPoint 156-315.81 - A generally accepted view on society is only the professionals engaged in professionally work, and so on, only professional in accordance with professional standards of study materials, as our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions, to bring more professional quality service for the user. Snowflake COF-C02 practice materials are typically seen as the tools of reviving, practicing and remembering necessary exam questions for the exam, spending much time on them you may improve the chance of winning. Our company has hired the best team of experts to create the best Appian ACD201 exam questions for you. All precise information on the Salesforce Plat-Admn-301 exam questions and high accurate questions are helpful. ACFE CFE-Financial-Transactions-and-Fraud-Schemes training materials can help you achieve this goal faster.
Updated: May 28, 2022