Goldmile-Infobiz help you to find real Cisco 350-401 Test Camp exam preparation process in a real environment. If you are a beginner, and if you want to improve your professional skills, Goldmile-Infobiz Cisco 350-401 Test Camp exam braindumps will help you to achieve your desire step by step. If you have any questions about the exam, Goldmile-Infobiz the Cisco 350-401 Test Camp will help you to solve them. As long as you choose our 350-401 Test Camp exam questions and pay successfully, you do not have to worry about receiving our learning materials for a long time. We assure you that you only need to wait 5-10 minutes and you will receive our 350-401 Test Camp exam questions which are sent by our system. This is the achievement made by IT experts in Goldmile-Infobiz after a long period of time.
CCNP Enterprise 350-401 So that you can achieve a multiplier effect.
You can download and try out our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam torrent freely before you purchase our product. And you can pass the exam successfully. Education degree does not equal strength, and it does not mean ability.
If our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent can’t help you pass the exam, we will refund you in full. If only the client provide the exam certificate and the scanning copy or the screenshot of the failure score of 350-401 Test Camp exam, we will refund the client immediately. The procedure of refund is very simple.
Cisco 350-401 Test Camp - I will recommend our study materials to you.
How to find a valid exam dumps providers which can elaborate on how to prepare you properly with more appropriate questions to pass 350-401 Test Camp exams? Yes, here is your chance to know us. Our products are just suitable for you. Our 350-401 Test Camp exam training dumps will help you master the real test and prepare well for your exam. If you worry about your exam, our 350-401 Test Camp exam training dumps will guide you and make you well preparing，you will pass exam without any doubt.
Time is the sole criterion for testing truth, similarly, passing rates are the only standard to test whether our 350-401 Test Camp study materials are useful. Our pass rate of our 350-401 Test Camp training prep is up to 98% to 100%, anyone who has used our 350-401 Test Camp exam practice has passed the exam successfully.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
We arrange the experts to check the update every day, if there is any update about the Oracle 1z0-1057-25 pdf vce, the latest information will be added into the Oracle 1z0-1057-25 exam dumps, and the useless questions will be remove of it to relief the stress for preparation. Workday Workday-Pro-Talent-and-Performance - Once you submit your questions, we will soon give you detailed explanations. Your knowledge range will be broadened and your personal skills will be enhanced by using the Broadcom 250-604 free pdf torrent, then you will be brave and confident to face the Broadcom 250-604 actual test. Through our test, the performance of our Fortinet FCSS_SASE_AD-24 learning quide becomes better than before. Salesforce MCE-Admn-201 - Come and check the free demo in our website you won’t regret it.
Updated: May 28, 2022