350-401 Test Cost exam dumps have a higher pass rate than products in the same industry. If you want to pass 350-401 Test Cost certification, then it is necessary to choose a product with a high pass rate. Our study materials guarantee the pass rate from professional knowledge, services, and flexible plan settings. We can make sure that we must protect the privacy of all customers who have bought our 350-401 Test Cost test questions. If you decide to use our 350-401 Test Cost test torrent, we are assured that we recognize the importance of protecting your privacy and safeguarding the confidentiality of the information you provide to us. The 350-401 Test Cost training materials are so very helpful.
350-401 Test Cost actual test guide is your best choice.
CCNP Enterprise 350-401 Test Cost - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) If you are a person who desire to move ahead in the career with informed choice, then the Cisco training material is quite beneficial for you. Not only our 350-401 Latest Test Questions Vce study materials contain the latest exam questions and answers, but also the pass rate is high as 98% to 100%. Success does not come only from the future, but it continues to accumulate from the moment you decide to do it.
Our website is here to lead you toward the way of success in 350-401 Test Cost certification exams and saves you from the unnecessary preparation materials. The latest 350-401 Test Cost dumps torrent are developed to facilitate our candidates and to improve their ability and expertise for the challenge of the actual test. We aimed to help our candidates get success in the 350-401 Test Cost practice test with less time and leas effort.
Cisco 350-401 Test Cost - You will never come across system crashes.
Long time learning might makes your attention wondering but our effective 350-401 Test Cost study materials help you learn more in limited time with concentrated mind. Just visualize the feeling of achieving success by using our 350-401 Test Cost exam guide,so you can easily understand the importance of choosing a high quality and accuracy 350-401 Test Cost training engine. You will have handsome salary get higher chance of winning and separate the average from a long distance and so on.
Please check it carefully. If you need the invoice, please contact our online workers.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Unlike some products priced heavily and too heavy to undertake, our Huawei H12-611_V2.0 practice materials are reasonable in price. Pegasystems PEGACPCSD25V1 - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. We can make sure the short time on Splunk SPLK-4001 training engine is enough for you to achieve the most outstanding result. We can be sure that with the professional help of our IIBA CPOA test guide you will surely get a very good experience. Huawei H19-338 - It is a truth well-known to all around the world that no pains and no gains.
Updated: May 28, 2022