You will feel grateful to choose our 350-401 Test Cram learning quiz! The data for our 350-401 Test Cram practice materials that come up with our customers who have bought our 350-401 Test Cram actual exam and provided their scores show that our high pass rate is 98% to 100%. This is hard to find and compare with in the market. Usually you may take months to review a professional exam, but with 350-401 Test Cram exam guide, you only need to spend 20-30 hours to review before the exam, and with our 350-401 Test Cram study materials, you will no longer need any other review materials, because our learning dumps have already included all the important test points. At the same time, 350-401 Test Cram practice engine will give you a brand-new learning method to review - let you master the knowledge in the course of the doing exercise. We are well-known for our wonderful performance on pushing more and more candidates to pass their 350-401 Test Cram exams and achieve their dreaming certifications.
But our 350-401 Test Cram exam questions have made it.
We have clear data collected from customers who chose our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Cram training engine, the passing rate is 98-100 percent. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our 350-401 Latest Test Report exam questions just focus on what is important and help you achieve your goal.
with our 350-401 Test Cram exam dumps for 20 to 30 hours, we can claim that our customers are confident to take part in your 350-401 Test Cram exam and pass it for sure. In the progress of practicing our 350-401 Test Cram study materials, our customers improve their abilities in passing the 350-401 Test Cram exam, we also upgrade the standard of the exam knowledge. Therefore, this indeed helps us establish a long-term cooperation relationship on our exam braindumps.
Cisco 350-401 Test Cram - They compile each answer and question carefully.
All the 350-401 Test Cram training files of our company are designed by the experts and professors in the field. The quality of our study materials is guaranteed. According to the actual situation of all customers, we will make the suitable study plan for all customers. If you buy the 350-401 Test Cram learning dumps from our company, we can promise that you will get the professional training to help you pass your exam easily. By our professional training, you will pass your exam and get the related certification in the shortest time.
In order to meet the demands of all people, these excellent experts and professors from our company have been working day and night. They tried their best to design the best 350-401 Test Cram certification training dumps from our company for all people.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
The first goal of our company is to help all people to pass the Citrix 1Y0-204 exam and get the related certification in the shortest time. If you do not receive our IBM C1000-200 study materials, please contact our online workers. Snowflake SnowPro-Core-KR - It is universally accepted that the competition in the labor market has become more and more competitive in the past years. All popular official tests have been included in our Salesforce Rev-Con-201 study materials. CompTIA N10-009 - If you have any questions about our study materials, you can send an email to us, and then the online workers from our company will help you solve your problem in the shortest time.
Updated: May 28, 2022