Goldmile-Infobiz Cisco 350-401 Test Duration exam information are cheap and fine. We use simulation questions and answers dedication to our candidates with ultra-low price and high quality. We sincerely hope that you can pass the exam. For busy workers, you can make the best of your time on railway or bus, mastering one question and answers every time will be great. As this version is called software version or PC version, maybe many candidates may think our 350-401 Test Duration PC test engine may just be used on personal computers. Goldmile-Infobiz's Cisco 350-401 Test Duration exam training materials is ensure that you fully understand the questions and issues behind the concept.
CCNP Enterprise 350-401 So you have nothing to lose.
CCNP Enterprise 350-401 Test Duration - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) You must be inspired by your interests and motivation. Goldmile-Infobiz real questions and answers are compiled by lots of IT experts with abundant experiences. So it has very high value.
With the pass rate high as 98% to 100%, you can totally rely on our 350-401 Test Duration exam questions. As we all know it is not easy to obtain the 350-401 Test Duration certification, and especially for those who cannot make full use of their sporadic time. But you are lucky, we can provide you with well-rounded services on 350-401 Test Duration practice braindumps to help you improve ability.
Cisco 350-401 Test Duration - It costs both time and money.
The 350-401 Test Duration training pdf provided by Goldmile-Infobiz is really the best reference material you can get from anywhere. The experts of Goldmile-Infobiz are trying their best to develop and research the high quality and 350-401 Test Duration exam preparation material to help you strengthen technical job skills. When you complete your payment, you will receive an email attached with 350-401 Test Duration practice pdf, then you can instantly download it and install on your phone or computer for study. The high efficiency preparation by 350-401 Test Duration exam dumps can ensure you 100% pass with ease.
You can totally rely on us! We never concoct any praise but show our capacity by the efficiency and profession of our 350-401 Test Duration practice materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
Our online test engine will improve your ability to solve the difficulty of Fortinet NSE4_FGT_AD-7.6 real questions and get used to the atmosphere of the formal test. Oracle N16599GC10 - Believe us and if you purchase our product it is very worthy. If you find you are extra taxed please tell us in time before purchasing our F5 F5CAB1 reliable Study Guide materials. Now I am going to introduce you the PDF version of SAP C_SIGVT_2506 test braindumps which are very convenient. We give customers the privileges to check the content of our Google Professional-Cloud-Security-Engineer real dumps before placing orders.
Updated: May 28, 2022