As long as you get to know our 350-401 Test Duration exam questions, you will figure out that we have set an easier operation system for our candidates. Once you have a try, you can feel that the natural and seamless user interfaces of our 350-401 Test Duration study materials have grown to be more fluent and we have revised and updated 350-401 Test Duration learning braindumps according to the latest development situation. Without doubt, we are the best vendor in this field and we also provide the first-class service for you. And we are so sure that we can serve you even better than you can imagine with our 350-401 Test Duration learning guide since we are keeping on doing a better job in this career. We are a leading corporation in this line handling 350-401 Test Duration study questions well with passing rate up to 98 and over percent, which is an unreachable goal for others. We have always been known as the superior after sale service provider, since we all tend to take lead of the whole process after you choose our 350-401 Test Duration exam questions.
CCNP Enterprise 350-401 You will like the software version.
CCNP Enterprise 350-401 Test Duration - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) It's never too late to know it from now on. If the user is still unsure which is best for him, consider applying for a free trial of several different types of test materials. It is believed that through comparative analysis, users will be able to choose the most satisfactory 350-401 New Test Bootcamp Materials test guide.
To address this issue, our 350-401 Test Duration actual exam offers three different versions for users to choose from. The PC version is the closest to the real test environment, which is an excellent choice for windows - equipped computers. And this version also helps establish the confidence of the candidates when they attend the 350-401 Test Duration exam after practicing.
Cisco 350-401 Test Duration - Perhaps this is the beginning of your change.
Many exam candidates feel hampered by the shortage of effective 350-401 Test Duration preparation quiz, and the thick books and similar materials causing burden for you. Serving as indispensable choices on your way of achieving success especially during this 350-401 Test Duration exam, more than 98 percent of candidates pass the exam with our 350-401 Test Duration training guide and all of former candidates made measurable advance and improvement.
In the process of job hunting, we are always asked what are the achievements and what certificates have we obtained? Therefore, we get the test Cisco certification and obtain the qualification certificate to become a quantitative standard, and our 350-401 Test Duration learning guide can help you to prove yourself the fastest in a very short period of time. Life is short for each of us, and time is precious to us.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
The PDF version of APMG-International ISO-IEC-27001-Foundation test questions can be printed out to facilitate your learning anytime, anywhere, as well as your own priorities. Our Fortinet EMEA-Advanced-Support practical material is a learning tool that produces a higher yield than the other. Microsoft AZ-800 - You are only supposed to practice Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent for about 20 to 30 hours before you are fully equipped to take part in the examination. The staff of Fortinet FCSS_SASE_AD-25 study guide is professionally trained. You can learn about the usage and characteristics of our CFA Institute Sustainable-Investing learning guide in various trial versions, so as to choose one of your favorite in formal purchase.
Updated: May 28, 2022