So our 350-401 Test Guide practice materials are perfect paragon in this industry full of elucidating content for exam candidates of various degrees to use for reference. Just come to buy our 350-401 Test Guide study guide! If you want to make one thing perfect and professional, then the first step is that you have to find the people who are good at them. Then you can start learning our 350-401 Test Guide exam questions in preparation for the exam. After years of hard work, our 350-401 Test Guide guide training can take the leading position in the market. So on one hand, we adopt a reasonable price for you, ensures people whoever is rich or poor would have the equal access to buy our useful 350-401 Test Guide real study dumps.
CCNP Enterprise 350-401 Only firm people will reach the other side.
App online version of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Guide practice engine -Be suitable to all kinds of equipment or digital devices. Our effort in building the content of our 350-401 100% Correct Answers learning questions lead to the development of learning guide and strengthen their perfection. Our 350-401 100% Correct Answers practice braindumps beckon exam candidates around the world with our attractive characters.
So our 350-401 Test Guide study materials are elemental materials you cannot miss. In your review duration, you can contact with our after-sales section if there are any problems with our 350-401 Test Guide practice braindumps. They will help you 24/7 all the time.
Cisco 350-401 Test Guide - It can maximize the efficiency of your work.
As is known to us, there are best sale and after-sale service of the 350-401 Test Guide study materials all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 350-401 Test Guide study materials for all customers. More importantly, it is evident to all that the 350-401 Test Guide study materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the 350-401 Test Guide exam and get the related certification in the shortest time, choosing the 350-401 Test Guide study materials from our company will be in the best interests of all people. We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination.
Goldmile-Infobiz guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
CIPS L4M5 - Once our system receives your application, it will soon send you what you need. Goldmile-Infobiz's Cisco SAP C-THR70-2505 exam training material is the best training materials on the Internet. Microsoft GH-300 - You can find their real comments in the comments sections. Splunk SPLK-5001 - Dreams and hopes are important, but more important is to go to practice and prove. SAP C-ARCON-2508 - Many people always are stopped by the difficult questions.
Updated: May 28, 2022