Usually you may take months to review a professional exam, but with 350-401 Test Pattern exam guide, you only need to spend 20-30 hours to review before the exam, and with our 350-401 Test Pattern study materials, you will no longer need any other review materials, because our learning dumps have already included all the important test points. At the same time, 350-401 Test Pattern practice engine will give you a brand-new learning method to review - let you master the knowledge in the course of the doing exercise. There is no exaggeration to say that with our 350-401 Test Pattern study materials for 20 to 30 hours, you will be ready to pass your 350-401 Test Pattern exam. Since our 350-401 Test Pattern exam torrent is designed on the purpose to be understood by our customers all over the world, it is compiled into the simplest language to save time and efforts. We offer free demos of our for your reference, and send you the new updates if our experts make them freely.
But our 350-401 Test Pattern exam questions have made it.
We have clear data collected from customers who chose our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Pattern training engine, the passing rate is 98-100 percent. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our New 350-401 Test Prep exam questions just focus on what is important and help you achieve your goal.
with our 350-401 Test Pattern exam dumps for 20 to 30 hours, we can claim that our customers are confident to take part in your 350-401 Test Pattern exam and pass it for sure. In the progress of practicing our 350-401 Test Pattern study materials, our customers improve their abilities in passing the 350-401 Test Pattern exam, we also upgrade the standard of the exam knowledge. Therefore, this indeed helps us establish a long-term cooperation relationship on our exam braindumps.
Cisco 350-401 Test Pattern - These services assure your avoid any loss.
Our 350-401 Test Pattern exam braindumps have become a brand that is good enough to stand out in the market. The high quality product like our 350-401 Test Pattern study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. The exam candidates of our 350-401 Test Pattern study materials are the best living and breathing ads. Just look at the comments on the 350-401 Test Pattern training guide, you will know that how popular they are among the candidates.
We have free demos of our 350-401 Test Pattern exam questions for your information and the demos offer details of real exam contents. All contents of 350-401 Test Pattern practice quiz contain what need to be mastered.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
You will find the exam is a piece of cake with the help of our SAP C-S4PM2-2507 study materials. And our ICF ICF-ACC training braindumps have became their best assistant on the way to pass the exam. And if you want to get all benefits like that, our Salesforce Salesforce-MuleSoft-Developer-I training quiz is your rudimentary steps to begin. All contents of Databricks Databricks-Certified-Professional-Data-Engineer training guide are being explicit to make you have explicit understanding of this exam. Under coordinated synergy of all staff, our ICF ICF-ACC practice braindumps achieved a higher level of perfection by keeping close attention with the trend of dynamic market.
Updated: May 28, 2022