Now, our 350-401 Test Practice exam questions just need you to spend some time on accepting our guidance, then you will become popular talents in the job market. As a matter of fact, you only to spend about 20 to 30 hours on studying our 350-401 Test Practice practice engine and you will get your certification easily. Our 350-401 Test Practice training guide can help you lead a better life. Goldmile-Infobiz's practice questions and answers about the Cisco certification 350-401 Test Practice exam is developed by our expert team's wealth of knowledge and experience, and can fully meet the demand of Cisco certification 350-401 Test Practice exam's candidates. From related websites or books, you might also see some of the training materials, but Goldmile-Infobiz's information about Cisco certification 350-401 Test Practice exam is the most comprehensive, and can give you the best protection. We have specific workers to be responsible for answering customers’ consultation about the 350-401 Test Practice learning materials.
CCNP Enterprise 350-401 I wish you good luck.
CCNP Enterprise 350-401 Test Practice - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Also, there will have no extra restrictions to your learning because different versions have different merits. Goldmile-Infobiz's latest training material about Cisco certification New 350-401 Exam Papers exam have 95% similarity with the real test. If you use Goldmile-Infobiz'straining program, you can 100% pass the exam.
There are a lot of advantages about the online version of the 350-401 Test Practice exam questions from our company. For instance, the online version can support any electronic equipment and it is not limited to all electronic equipment. More importantly, the online version of 350-401 Test Practice study practice dump from our company can run in an off-line state, it means that if you choose the online version, you can use the 350-401 Test Practice exam questions when you are in an off-line state.
Cisco 350-401 Test Practice - We absolutely protect the interests of consumers.
Our company has dedicated ourselves to develop the 350-401 Test Practice latest practice dumps for all candidates to pass the exam easier, also has made great achievement after more than ten years' development. As the certification has been of great value, a right 350-401 Test Practice exam guide can be your strong forward momentum to help you pass the exam like a hot knife through butter. On the contrary, it might be time-consuming and tired to prepare for the 350-401 Test Practice exam without a specialist study material. So it's would be the best decision to choose our 350-401 Test Practice study tool as your learning partner. Our 350-401 Test Practice study tool also gives numerous candidates a better perspective on the real exam. Having been specializing in the research of 350-401 Test Practice latest practice dumps, we now process a numerous of customers with our endless efforts, and we believe that our 350-401 Test Practice exam guide will percolate to your satisfaction.
We can guarantee that you can pass the Cisco 350-401 Test Practice exam the first time. If you buy the goods of Goldmile-Infobiz, then you always be able to get newer and more accurate test information.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
The price of our PRINCE2 PRINCE2-Foundation exam materials is quite favourable no matter on which version. IBM C1000-182 - How do you want to prove your ability? More and more people prove themselves by taking IT certification exam. That is the reason why we make it without many sales tactics to promote our Juniper JN0-423 exam braindumps. CompTIA 220-1101 - Miss the opportunity, you will regret it. Being anxious for the exam ahead of you? Have a look of our SAP C-ABAPD-2507 training engine please.
Updated: May 28, 2022