If you would like to sail through the test, come on and try it. To pass Cisco 350-401 Test Questions certification exam seems to be a very difficult task. Having registered 350-401 Test Questions test, are you worrying about how to prepare for the exam? If so, please see the following content, I now tell you a shortcut through the 350-401 Test Questions exam. Goldmile-Infobiz guarantee exam success rate of 100% ratio, except no one. You choose Goldmile-Infobiz, and select the training you want to start, you will get the best resources with market and reliability assurance. The dumps can let you better accurate understanding questions point of 350-401 Test Questions exam so that you can learn purposefully the relevant knowledge.
CCNP Enterprise 350-401 To selecte Goldmile-Infobiz is to choose success.
In order to let you be rest assured to purchase our products, we offer a variety of versions of the samples of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Questions study materials for your trial. If you buy Goldmile-Infobiz exam dumps, you will obtain free update for a year. Once the dumps update, Goldmile-Infobiz will immediately send the latest certification training materials to your mailbox.
350-401 Test Questions exam simulations files can help you obtain an IT certification. As we all know IT exam cost is very high, most people have to try more than one time so that they can pass exam. If you prepare based on our 350-401 Test Questions exam simulations files, you will feel easy to clear exam once certainly.
The way to pass the Cisco 350-401 Test Questions actual test is diverse.
We are a team of IT professionals that provide our customers with the up-to-date 350-401 Test Questions study guide and the current certification exam information. Our exam collection contains the latest questions, accurate 350-401 Test Questions exam answers and some detailed explanations. You will find everything you want to overcome the difficulties of 350-401 Test Questions practice exam and questions. You will get high mark followed by our materials.
350-401 Test Questions online test engine can simulate the actual test, which will help you familiar with the environment of the 350-401 Test Questions real test. The 350-401 Test Questions self-assessment features can bring you some convenience.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In fact, If you want to release valid & latest Cisco Microsoft AZ-800 test simulations, you need to get first-hand information, we spend a lot of money to maintain and development good relationship, we well-paid hire experienced education experts. Our training materials contain the latest exam questions and valid Salesforce Manufacturing-Cloud-Professional exam answers for the exam preparation, which will ensure you clear exam 100%. If you are willing to buy our HP HPE3-CL04 dumps pdf, I will recommend you to download the free dumps demo first and check the accuracy of our HP HPE3-CL04 practice questions. Nutanix NCP-CN-6.10 - It is so cool even to think about it. You will get our valid Microsoft PL-300 dumps torrent and instantly download the exam pdf after payment.
Updated: May 28, 2022