You can browse our official websites to check our sales volumes. At the same time, many people pass the exam for the first time under the guidance of our 350-401 Test Questions practice exam. And there is no exaggeration that our pass rate for our 350-401 Test Questions study guide is 98% to 100% which is proved and tested by our loyal customers. 350-401 Test Questions training dumps are created in the most unique, customized way so it can cover different areas of exam with the Quality and Price of the product which is unmatched by our Competitors. The 100% guarantee pass pass rate of 350-401 Test Questions training materials that guarantee you to pass your Exam and will not permit any type of failure. As you can see, our products are absolutely popular in the market.
CCNP Enterprise 350-401 The data are unique-particular in this career.
CCNP Enterprise 350-401 Test Questions - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) And at the same time, we always keep our questions and answers to the most accurate and the latest. We abandon all obsolete questions in this latest Latest 350-401 Test Papers exam torrent and compile only what matters toward actual real exam. Without voluminous content to remember, our Latest 350-401 Test Papers quiz torrent contains what you need to know and what the exam will test.
You can see that so many people are already ahead of you! You really don't have time to hesitate. If you really want to improve your ability, you should quickly purchase our 350-401 Test Questions study braindumps!
Cisco 350-401 Test Questions - And you can choose the favorite one.
In today's society, many people are busy every day and they think about changing their status of profession. They want to improve their competitiveness in the labor market, but they are worried that it is not easy to obtain the certification of 350-401 Test Questions. Our study tool can meet your needs. Once you use our 350-401 Test Questions exam materials, you don't have to worry about consuming too much time, because high efficiency is our great advantage. You only need to spend 20 to 30 hours on practicing and consolidating of our 350-401 Test Questions learning material, you will have a good result. After years of development practice, our 350-401 Test Questions test torrent is absolutely the best. You will embrace a better future if you choose our 350-401 Test Questions exam materials.
Many exam candidates are uninformed about the fact that our 350-401 Test Questions preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our reliable CIPS L5M5 question dumps are developed by our experts who have rich experience in the fields. All intricate points of our IBM C1000-182 study guide will not be challenging anymore. Secondly, our Amazon AWS-Certified-Developer-Associate-KR exam questions will spare no effort to perfect after-sales services. So our Microsoft PL-400 latest dumps are highly effective to make use of. Our PECB NIS-2-Directive-Lead-Implementer preparation exam is consisted of a team of professional experts and technical staff, which means that you can trust our security system with whole-heart.
Updated: May 28, 2022