All questions that may appear in the exam are included in our exam dumps. With the changes of exam outline, we also update our exam dumps at any time. Goldmile-Infobiz pdf real questions and answers can prevent you from wasting lots of time and efforts on preparing for the exam and can help you sail through you exam with ease and high efficiency. The data showed that our high pass rate is unbelievably 98% to 100%. Without doubt, your success is 100% guaranteed with our 350-401 Test Questions training guide. There will be one version right for you and help you quickly pass the 350-401 Test Questions with ease, so that you can obtain the most authoritative international recognition on your IT ability.
CCNP Enterprise 350-401 Then you will be confident in the actual test.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Questions quiz torrent we provide is compiled by experts with profound experiences according to the latest development in the theory and the practice so they are of great value. Valid Test 350-401 Fee exam cram PDF will be the right shortcut for your exam. You shouldn't miss any possible chance or method to achieve your goal, especially our Valid Test 350-401 Fee exam cram PDF always has 100% passing rate.
The new supplemental updates will be sent to your mailbox if there is and be free. Because we promise to give free update of our 350-401 Test Questions learning materials for one year to all our customers. Generally speaking, you can achieve your basic goal within a week with our 350-401 Test Questions study guide.
Cisco 350-401 Test Questions - Quickly, you will become the millionaire.
350-401 Test Questions Exam is just a piece of cake if you have prepared for the exam with the helpful of Goldmile-Infobiz's exceptional study material. If you are a novice, begin from 350-401 Test Questions study guide and revise your learning with the help of testing engine. 350-401 Test Questions Exam brain dumps are another superb offer of Goldmile-Infobiz that is particularly helpful for those who want to the point and the most relevant content to pass 350-401 Test Questions exam. With all these products, your success is assured with 100% money back guarantee.
What’s more, all computers you have installed our study materials can run normally. Our 350-401 Test Questions exam guide are cost-effective.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Cyber AB CMMC-CCA - We have benefited a lot from those changes. Cisco 700-242 - Selecting our study materials is definitely your right decision. In our software version of the ACFE CFE-Financial-Transactions-and-Fraud-Schemes exam dumps, the unique point is that you can take part in the practice test before the real ACFE CFE-Financial-Transactions-and-Fraud-Schemes exam. There is a lot of data to prove that our Huawei H31-311_V2.5 practice guide has achieved great success. SAP C_ARP2P_2508 - We will tailor services to different individuals and help them take part in their aimed exams after only 20-30 hours practice and training.
Updated: May 28, 2022