Provided that you lose your exam with our 350-401 Test Simulator exam questions unfortunately, you can have full refund or switch other version for free. All the preoccupation based on your needs and all these explain our belief to help you have satisfactory and comfortable purchasing services on the 350-401 Test Simulator study guide. We assume all the responsibilities our 350-401 Test Simulator simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly. I believe you have a different sensory experience for this version of the product. Because the software version of the product can simulate the real test environment, users can realize the effect of the atmosphere of the 350-401 Test Simulator exam at home through the software version. Our 350-401 Test Simulator study guide may not be as famous as other brands for the time being, but we can assure you that we won't lose out on quality.
CCNP Enterprise 350-401 This certification gives us more opportunities.
Many exam candidates feel hampered by the shortage of effective 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Simulator preparation quiz, and the thick books and similar materials causing burden for you. In the process of job hunting, we are always asked what are the achievements and what certificates have we obtained? Therefore, we get the test Cisco certification and obtain the qualification certificate to become a quantitative standard, and our Valid 350-401 Exam Camp Materials learning guide can help you to prove yourself the fastest in a very short period of time. Life is short for each of us, and time is precious to us.
Our 350-401 Test Simulator test questions are available in three versions, including PDF versions, PC versions, and APP online versions. Each version has its own advantages and features, 350-401 Test Simulator test material users can choose according to their own preferences. The most popular version is the PDF version of 350-401 Test Simulator exam prep.
Cisco 350-401 Test Simulator - If you make up your mind, choose us!
Our 350-401 Test Simulator exam braindumps are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. Pass rate is what we care for preparing for an examination, which is the final goal of our 350-401 Test Simulator certification guide. According to the feedback of our users, we have the pass rate of 99%, which is equal to 100% in some sense. The high quality of our products also embodies in its short-time learning. You are only supposed to practice Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent for about 20 to 30 hours before you are fully equipped to take part in the examination.
All of 350-401 Test Simulator learning materials do this to allow you to solve problems in a pleasant atmosphere while enhancing your interest in learning. If you do not get a reply from our service, you can contact customer service again.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
SAP C-THR81-2505 - In fact, all three versions contain the same questions and answers. First, by telling our customers what the key points of learning, and which learning Huawei H12-821_V1.0 exam training questions is available, they may save our customers money and time. Our ISTQB ISTQB-CTFL-KR learning quiz will be your best choice. SAP C-ABAPD-2507 - Do you want to choose a lifetime of mediocrity or become better and pursue your dreams? I believe you will have your own pursuit. In the past ten years, we have made many efforts to perfect our CompTIA 220-1102 study materials.
Updated: May 28, 2022