People from all walks of life all work hard for the future. You must work hard to upgrade your IT skills. Then, do you have obtained Cisco 350-401 Test Syllabus certificate which is very popular? How much do you know about 350-401 Test Syllabus test? If you want to pass 350-401 Test Syllabus exam without enough exam related knowledge, how should you do? But don't you worry: Goldmile-Infobiz will give assistance to you. It is very easy and convenient to use and find. Our 350-401 Test Syllabus exam questions can meet your needs to the maximum extent, and our 350-401 Test Syllabus learning materials are designed to the greatest extent from the customer's point of view. So you can quickly know your weaknesses and shortcomings, which is helpful to your further study.
CCNP Enterprise 350-401 Choosing our products is choosing success.
CCNP Enterprise 350-401 Test Syllabus - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Experts call them experts, and they must have their advantages. You can totally trust our Reliable 350-401 Exam Cram Review practice test because all questions are created based on the requirements of the certification center. Latest Reliable 350-401 Exam Cram Review test questions are verified and tested several times by our colleagues to ensure the high pass rate of our Reliable 350-401 Exam Cram Review study guide.
Unlike other 350-401 Test Syllabus study materials, there is only one version and it is not easy to carry. Our 350-401 Test Syllabus exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our 350-401 Test Syllabus training engine are reasonable for even students to afford and according to the version that you want to buy.
Our Cisco 350-401 Test Syllabus exam questions are often in short supply.
With 350-401 Test Syllabus practice materials, you don't need to spend a lot of time and effort on reviewing and preparing. For everyone, time is precious. Office workers and mothers are very busy at work and home; students may have studies or other things. Using 350-401 Test Syllabus guide questions, you only need to spend a small amount of time to master the core key knowledge, pass the 350-401 Test Syllabus exam, and get a certificate.
Once it is time to submit your exercises, the system of the 350-401 Test Syllabus preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
SAP C-BCWME-2504 - Goldmile-Infobiz's braindumps provide you the gist of the entire syllabus in a specific set of questions and answers. We sincerely hope that you can pay more attention to our ACFE CFE-Financial-Transactions-and-Fraud-Schemes study questions. You just need to spend about twenty to thirty hours before taking the real Workday Workday-Pro-Compensation exam. Our Network Appliance NS0-076 learning questions will inspire your motivation to improve yourself. Without voluminous content to remember, our SAP C_CPI_2506 practice materials contain what you need to know and what the exam want to test, So our SAP C_CPI_2506 real exam far transcend others in market.
Updated: May 28, 2022