So what we can do is to help you not waste your efforts on the exam preparation. The Reliability and authority of 350-401 Trustworthy Pdf exam software on our Goldmile-Infobiz has been recognized by majority of our customers, which will be found when you download our free demo. We will try our best to help you pass 350-401 Trustworthy Pdf exam successfully. Free demos are understandable materials as well as the newest information for your practice. Under coordinated synergy of all staff, our 350-401 Trustworthy Pdf practice materials achieved a higher level of perfection by keeping close attention with the trend of dynamic market. Many users who have easily pass 350-401 Trustworthy Pdf exam with our 350-401 Trustworthy Pdf exam software of Goldmile-Infobiz.
It can make you pass the Cisco 350-401 Trustworthy Pdf exam.
All questions and answers in our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Trustworthy Pdf real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Trustworthy Pdf exam pdf. Goldmile-Infobiz Cisco 350-401 Valid Exam Pdf exam training materials have the best price value. Compared to many others training materials, Goldmile-Infobiz's Cisco 350-401 Valid Exam Pdf exam training materials are the best.
Well preparation is half done, so choosing good 350-401 Trustworthy Pdf training materials is the key of clear exam in your first try with less time and efforts. Our website offers you the latest preparation materials for the 350-401 Trustworthy Pdf real exam and the study guide for your review. There are three versions according to your study habit and you can practice our 350-401 Trustworthy Pdf dumps pdf with our test engine that help you get used to the atmosphere of the formal test.
Cisco 350-401 Trustworthy Pdf - So you have nothing to lose.
In order to help you enjoy the best learning experience, our PDF 350-401 Trustworthy Pdf practice engine supports you download on your computers and print on papers. You must be inspired by your interests and motivation. Once you print all the contents of our 350-401 Trustworthy Pdf practice dumps on the paper, you will find what you need to study is not as difficult as you imagined before. Also, you can make notes on your papers to help you memorize and understand the difficult parts of the 350-401 Trustworthy Pdf exam questions.
Goldmile-Infobiz real questions and answers are compiled by lots of IT experts with abundant experiences. So it has very high value.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
With the pass rate high as 98% to 100%, you can totally rely on our CSI CSC2 exam questions. As an enthusiasts in IT industry, are you preparing for the important CISI IFC exam? Why not let our Goldmile-Infobiz to help you? We provide not only the guarantee for you to pass CISI IFC exam, but also the relaxing procedure of CISI IFC exam preparation and the better after-sale service. CIPS L4M4 - I dare to make a bet that you will not be exceptional. Our Goldmile-Infobiz's study of Amazon AWS-Developer exam make our Amazon AWS-Developer exam software effectively guaranteed. So you will be bound to pass your Esri EAEP2201 exam since you have perfected yourself in taking the Esri EAEP2201 exam with full confidence.
Updated: May 28, 2022