By our three versions of 350-401 Valid Torrent study engine: the PDF, Software and APP online, we have many repeat orders in a long run. The PDF version helps you read content easier at your process of studying with clear arrangement, and the PC Test Engine version of 350-401 Valid Torrent practice questions allows you to take stimulation exam to check your process of exam preparing, which support windows system only. Moreover, there is the APP version of 350-401 Valid Torrent study engine, you can learn anywhere at any time. And our 350-401 Valid Torrent exam questions can give a brand new experience on the studying styles for we have three different versions of our 350-401 Valid Torrent study guide. As promising learners in this area, every exam candidates need to prove self-ability to working environment to get higher chance and opportunities for self-fulfillment. We have hired professional staff to maintain 350-401 Valid Torrent practice engine and our team of experts also constantly updates and renew the question bank according to changes in the syllabus.
CCNP Enterprise 350-401 Giving is proportional to the reward.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Torrent study materials are of great help in this sense. Once you have used our 350-401 Pass Test exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 350-401 Pass Test exam training at your own right. Our 350-401 Pass Test exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 350-401 Pass Test test guide, you can enter the learning state.
We can hardly leave the Internet now, we usually use computer or iPad to work and learn. Inevitably, we will feel too tired if we worked online too long. You can see our 350-401 Valid Torrent exam materials have three version, including PDf version, APP version and soft version, the PDf version support printing.
Cisco 350-401 Valid Torrent - How to get to heaven? Shortcart is only one.
There is no site can compare with Goldmile-Infobiz site's training materials. This is unprecedented true and accurate test materials. To help each candidate to pass the exam, our IT elite team explore the real exam constantly. I can say without hesitation that this is definitely a targeted training material. The Goldmile-Infobiz's website is not only true, but the price of materials are very reasonable. When you choose our products, we also provide one year of free updates. This allow you to have more ample time to prepare for the exam. So that you can eliminate your psychological tension of exam, and reach a satisfactory way.
One is to learn exam related knowledge 350-401 Valid Torrent certification test demands. Are you doing like this?However the above method is the worst time-waster and you cannot get the desired effect.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Amazon AIF-C01-KR - Someone asked, where is success? Then I tell you, success is in Goldmile-Infobiz. Microsoft AI-102 - Fourthly, Goldmile-Infobiz exam dumps have two versions: PDF and SOFT version. ACAMS CAMS7-CN - As long as you have it, any examination do not will knock you down. Different person has different goals, but our Goldmile-Infobiz aims to help you successfully pass SAP C_ARCIG_2508 exam. Google Professional-Data-Engineer - If a person is strong-willed, it is close at hand.
Updated: May 28, 2022