The clients only need to choose the version of the product, fill in the correct mails and pay for our Cisco Certified Network Associate Exam guide dump. Then they will receive our mails in 5-10 minutes. Once the clients click on the links they can use our 200-301 Exam Camp Sheet study materials immediately. As we all know, 200-301 Exam Camp Sheet certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. For example, the social acceptance of 200-301 Exam Camp Sheet certification now is higher and higher. All in all, we hope that you are brave enough to challenge yourself.
CCNA 200-301 Goldmile-Infobiz has a huge IT industry elite team.
Generally speaking, 200-301 - Cisco Certified Network Associate Exam Exam Camp Sheet certification has become one of the most authoritative voices speaking to us today. Now many IT professionals agree that Cisco certification Detailed 200-301 Study Plan exam certificate is a stepping stone to the peak of the IT industry. Cisco certification Detailed 200-301 Study Plan exam is an exam concerned by lots of IT professionals.
200-301 Exam Camp Sheet study engine is so amazing. What are you waiting for? The hit rate of 200-301 Exam Camp Sheet study engine is very high.
Cisco 200-301 Exam Camp Sheet - Continuous improvement is a good thing.
Cisco 200-301 Exam Camp Sheet certification exam is very important for every IT person. With this certification you will not be eliminated, and you will be a raise. Some people say that to pass the Cisco 200-301 Exam Camp Sheet exam certification is tantamount to success. Yes, this is true. You get what you want is one of the manifestations of success. Goldmile-Infobiz of Cisco 200-301 Exam Camp Sheet exam materials is the source of your success. With this training materials, you will speed up the pace of success, and you will be more confident.
The content of our 200-301 Exam Camp Sheet learning guide is consistent with the proposition law all the time. We can't say it’s the best reference, but we're sure it won't disappoint you.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
ECCouncil 212-82 - So, it can save much time for us. Through the practice of our HP HPE3-CL03 exam questions, you can grasp the intention of the examination organization accurately. Goldmile-Infobiz The Open Group OGEA-101 braindump has a high hit rate. You don't have to spend all your energy to the exam because our SAP C_ARSUM_2508 learning questions are very efficient. And then are what materials your worthwhile option? Do you have chosen Goldmile-Infobiz Cisco EMC D-PSC-DS-01 real questions and answers? If so, you don't need to worry about the problem that can't pass the exam.
Updated: May 28, 2022