We have tens of thousands of supporters around the world eager to pass the exam with our 200-301 Exam Simulator Free learning guide which are having a steady increase on the previous years. Exam candidates around the world are longing for learning from our practice materials. If you want to have an outline and brief understanding of our 200-301 Exam Simulator Free preparation materials we offer free demos for your reference. If you buy our 200-301 Exam Simulator Free exam questions, then you will find that Our 200-301 Exam Simulator Free actual exam has covered all the knowledge that must be mastered in the exam. You just should take the time to study 200-301 Exam Simulator Free preparation materials seriously, no need to refer to other materials, which can fully save your precious time. Any changes taking place in the environment and forecasting in the next 200-301 Exam Simulator Free exam will be compiled earlier by them.
CCNA 200-301 The more efforts you make, the luckier you are.
Candidates who participate in the Cisco certification 200-301 - Cisco Certified Network Associate Exam Exam Simulator Free exam should select exam practice questions and answers of Goldmile-Infobiz, because Goldmile-Infobiz is the best choice for you. Our Latest 200-301 Exam Tips practice guide is cited for the outstanding service. In fact, we have invested many efforts to train our workers.
If you attend Cisco certification 200-301 Exam Simulator Free exams, your choosing Goldmile-Infobiz is to choose success! I wish you good luck.
Cisco 200-301 Exam Simulator Free - We are waiting for you.
It is the best choice to accelerate your career by getting qualified by 200-301 Exam Simulator Free certification. Goldmile-Infobiz provides the most updated and accurate 200-301 Exam Simulator Free study pdf for clearing your actual test. The quality of 200-301 Exam Simulator Free practice training torrent is checked by our professional experts. The high pass rate and high hit rate of Cisco pdf vce can ensure you 100% pass in the first attempt. What’s more, if you fail the 200-301 Exam Simulator Free test unfortunately, we will give you full refund without any hesitation.
For instance, our 200-301 Exam Simulator Free exam questions fully accords with your requirements. Knowledge makes prominent contributions to human civilization and progress.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
You can check out the interface, question quality and usability of our Juniper JN0-336 practice exams before you decide to buy it. VMware 2V0-17.25 - Then you don't have to spend extra time searching for information when you're facing other exams later, just choose us again. IBM C1000-200 - You will free access to our test engine for review after payment. Because of not having appropriate review methods and review materials, or not grasping the rule of the questions, so many candidates eventually failed to pass the SAP C-ABAPD-2507 exam even if they have devoted much effort. Each question in Cisco 350-501 pass guide is certified by our senior IT experts to improve candidates' ability and skills.
Updated: May 28, 2022