Obtaining a certificate is equivalent to having a promising future and good professional development. Our 200-301 Latest Dumps Questions study materials have a good reputation in the international community and their quality is guaranteed. Why don't you there have a brave attempt? You will certainly benefit from your wise choice. As the talent competition increases in the labor market, it has become an accepted fact that the 200-301 Latest Dumps Questions certification has become an essential part for a lot of people, especial these people who are looking for a good job, because the certification can help more and more people receive the renewed attention from the leader of many big companies. So it is very important for a lot of people to gain the 200-301 Latest Dumps Questions certification. You will become friends with better people.
CCNA 200-301 You cannot always stay in one place.
CCNA 200-301 Latest Dumps Questions - Cisco Certified Network Associate Exam Our IT experts team will continue to take advantage of professional experience to come up with accurate and detailed exam practice questions to help you pass the exam. The 200-301 Latest Test Objectives Pdf certification exam training tools contains the latest studied materials of the exam supplied by IT experts. In the past few years, Cisco certification 200-301 Latest Test Objectives Pdf exam has become an influenced computer skills certification exam.
In Goldmile-Infobiz you can always find out the most suitable training way for you to pass the exam easily. No matter you choose which kind of the training method, Goldmile-Infobiz will provide you a free one-year update service. Goldmile-Infobiz's information resources are very wide and also very accurate.
Cisco 200-301 Latest Dumps Questions - Do not hesitate!
If you Goldmile-Infobiz, Goldmile-Infobiz can ensure you 100% pass Cisco certification 200-301 Latest Dumps Questions exam. If you fail to pass the exam, Goldmile-Infobiz will full refund to you.
Whole Goldmile-Infobiz's pertinence exercises about Cisco certification 200-301 Latest Dumps Questions exam is very popular. Goldmile-Infobiz's training materials can not only let you obtain IT expertise knowledge and a lot of related experience, but also make you be well prepared for the exam.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
A lot of people want to pass Cisco certification ACAMS CAMS exam to let their job and life improve, but people participated in the Cisco certification ACAMS CAMS exam all knew that Cisco certification ACAMS CAMS exam is not very simple. You can free download part of practice questions and answers about Cisco certification Huawei H13-921_V1.5 exam as a try to test the reliability of Goldmile-Infobiz's products. If you choose Goldmile-Infobiz to provide you with the pertinence training, you can easily pass the Cisco certification SAP C-ABAPD-2507 exam. Salesforce Agentforce-Specialist - Are you one of them? Are you still worried and confused because of the the various exam materials and fancy training courses exam? Goldmile-Infobiz is the right choice for you. Microsoft AZ-700-KR - Please add Goldmile-Infobiz to you shopping car quickly.
Updated: May 28, 2022