There have detailed introductions about the 200-301 Latest Test Review learnign braindumps such as price, version, free demo and so on. As long as you click on it, all the information will show up right away. It is quite convenient. This means that unlike other products, the end of your payment means the end of the entire transaction our 200-301 Latest Test Review learning materials will provide you with perfect services until you have successfully passed the 200-301 Latest Test Review exam. And if you have any questions, just feel free to us and we will give you advice on 200-301 Latest Test Review study guide as soon as possible. Just study with our 200-301 Latest Test Review exam braindumps 20 to 30 hours, and you will be able to pass the exam.
CCNA 200-301 No one will laugh at a hardworking person.
With the 200-301 - Cisco Certified Network Associate Exam Latest Test Review test training, you can both have the confidence and gumption to ask for better treatment. Once you have used our 200-301 Valid Exam Questions Fee exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 200-301 Valid Exam Questions Fee exam training at your own right. Our 200-301 Valid Exam Questions Fee exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 200-301 Valid Exam Questions Fee test guide, you can enter the learning state.
It is more convenient for you to look and read while protect our eye. If you print the 200-301 Latest Test Review exam materials out, you are easy to carry it with you when you out, it is to say that will be a most right decision to choose the 200-301 Latest Test Review, you will never regret it. We can find that the Internet is getting closer and closer to our daily life and daily work.
Cisco 200-301 Latest Test Review - Then join our preparation kit.
We can send you a link within 5 to 10 minutes after your payment. You can click on the link immediately to download our 200-301 Latest Test Review real exam, never delaying your valuable learning time. If you want time - saving and efficient learning, our 200-301 Latest Test Review exam questions are definitely your best choice. And if you buy our 200-301 Latest Test Review learning braindumps, you will be bound to pass for our 200-301 Latest Test Review study materials own the high pass rate as 98% to 100%.
What most useful is that PDF format of our 200-301 Latest Test Review exam materials can be printed easily, you can learn it everywhere and every time you like. It is really convenient for candidates who are busy to prepare the exam.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
Microsoft SC-900 - The PC version is ideal for computers with windows systems, which can simulate a real test environment. In short, the guidance of our Microsoft PL-900 practice questions will amaze you. As the labor market becomes more competitive, a lot of people, of course including students, company employees, etc., and all want to get Medical Tests PTCE authentication in a very short time, this has developed into an inevitable trend. Juniper JN0-232 - You need to concentrate on memorizing the wrong questions. Salesforce Platform-App-Builder - Good opportunities are always for those who prepare themselves well.
Updated: May 28, 2022