The smartest way of getting high passing score in 200-301 New Study Guide valid test is choosing latest and accurate certification learning materials. The up-to-date 200-301 New Study Guide exam answers will save you from wasting much time and energy in the exam preparation. The content of our 200-301 New Study Guide dumps torrent covers the key points of exam, which will improve your ability to solve the difficulties of 200-301 New Study Guide real questions. Do you wonder why so many peers can successfully pass 200-301 New Study Guide exam? Are also you eager to obtain 200-301 New Study Guide exam certification? Now I tell you that the key that they successfully pass the exam is owing to using our 200-301 New Study Guide exam software provided by our Goldmile-Infobiz. Our 200-301 New Study Guide exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our 200-301 New Study Guide exam software, you can improve your study ability to obtain 200-301 New Study Guide exam certification. Our website always checks the update of 200-301 New Study Guide test questions to ensure the accuracy of our study materials and keep the most up-to-dated exam requirements.
CCNA 200-301 Also it is good for releasing pressure.
CCNA 200-301 New Study Guide - Cisco Certified Network Associate Exam You can totally rely on our products for your future learning path. The 200-301 Latest Test Pass4Sure practice test content is very easy and simple to understand. We offer money back guarantee if anyone fails but that doesn’t happen if one use our 200-301 Latest Test Pass4Sure dumps.
And if you buy the value pack, you have all of the three versions, the price is quite preferential and you can enjoy all of the study experiences. This means you can study 200-301 New Study Guide practice engine anytime and anyplace for the convenience these three versions bring. We have developed three versions of our 200-301 New Study Guide exam questions.
Cisco 200-301 New Study Guide - And the quality of our exam dumps are very high!
Our 200-301 New Study Guide study braindumps can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned. Our 200-301 New Study Guide prep guide has high quality. So there is all effective and central practice for you to prepare for your test. With our professional ability, we can accord to the necessary testing points to edit 200-301 New Study Guide exam questions. It points to the exam heart to solve your difficulty. So high quality materials can help you to pass your exam effectively, make you feel easy, to achieve your goal.
Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate. What the certificate main? All kinds of the test 200-301 New Study Guide certification, prove you through all kinds of qualification certificate, it is not hard to find, more and more people are willing to invest time and effort on the 200-301 New Study Guide exam guide, because get the test 200-301 New Study Guide certification is not an easy thing, so, a lot of people are looking for an efficient learning method.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
So you will definitely feel it is your fortune to buy our Microsoft MS-102 exam guide question. If you buy our Huawei H13-921_V1.5 study questions, you can enjoy the similar real exam environment. Perhaps you worry about that you have difficulty in understanding our Microsoft MB-700 training questions. Our HP HPE3-CL04 study materials have three versions which are versions of PDF, Software/PC, and APP/Online. The DSCI DCPLA guide files from our company are designed by a lot of experts and professors of our company in the field.
Updated: May 28, 2022