If you have bought the 200-301 Questions And Answers exam questions before, then you will know that we have free demos for you to download before your purchase. Free demos of our 200-301 Questions And Answers study guide are understandable materials as well as the newest information for your practice. Under coordinated synergy of all staff, our 200-301 Questions And Answers practice braindumps achieved a higher level of perfection by keeping close attention with the trend of dynamic market. Help is to arrange time for you and provide you with perfect service. What are the advantages of our 200-301 Questions And Answers test guide? I hope you can take a moment to find out. By concluding quintessential points into 200-301 Questions And Answers actual exam, you can pass the exam with the least time while huge progress.
CCNA 200-301 It can maximize the efficiency of your work.
If you want to pass the 200-301 - Cisco Certified Network Associate Exam Questions And Answers exam and get the related certification in the shortest time, choosing the 200-301 - Cisco Certified Network Associate Exam Questions And Answers study materials from our company will be in the best interests of all people. Goldmile-Infobiz guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect.
Once our system receives your application, it will soon send you what you need. Please ensure you have submitted the right email address. And you will have the demos to check them out.
Cisco 200-301 Questions And Answers - It is the leader in all training materials.
Our loyal customers give our 200-301 Questions And Answers exam materials strong support. So we are deeply moved by their persistence and trust. Your support and praises of our 200-301 Questions And Answers study guide are our great motivation to move forward. You can find their real comments in the comments sections. There must be good suggestions for you on the 200-301 Questions And Answers learning quiz as well. And we will try our best to satisfy our customers with better quatily and services.
Not to mention that Goldmile-Infobiz Cisco 200-301 Questions And Answers exam training materials are many candidates proved in practice. It brings the success of each candidate is also real and effective.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
SAP C_ARP2P_2508 - Many people always are stopped by the difficult questions. After you obtain CIPS L4M5 certificate, you can also attend other certification exams in IT industry. The the probability of passing Cisco certification Microsoft PL-400 exam is very small, but the reliability of Goldmile-Infobiz can guarantee you to pass the examination of this probability. For Cisco Fortinet NSE7_SSE_AD-25 certification test, are you ready? The exam comes in sight, but can you take the test with confidence? If you have not confidence to sail through your exam, here I will recommend the most excellent reference materials for you. Goldmile-Infobiz will provide good training tools for your Cisco certification ISACA CRISC exam and help you pass Cisco certification ISACA CRISC exam.
Updated: May 28, 2022