The fact is that they never insist on one thing and give up quickly. Our 200-301 Real Exam Questions study dumps will assist you to overcome your shortcomings and become a persistent person. Once you have made up your minds to change, come to purchase our 200-301 Real Exam Questions training practice. Goldmile-Infobiz of Cisco 200-301 Real Exam Questions exam materials is the source of your success. With this training materials, you will speed up the pace of success, and you will be more confident. And our pass rate of our 200-301 Real Exam Questions exam braindumps is high as 98% to 100%.
CCNA 200-301 Everyone wants to succeed.
Our Goldmile-Infobiz is a website that can provide you with a shortcut to pass Cisco certification 200-301 - Cisco Certified Network Associate Exam Real Exam Questions exam. The contents of 200-301 Latest Exam Testking exam training material cover all the important points in the 200-301 Latest Exam Testking actual test, which can ensure the high hit rate. You can instantly download the Cisco 200-301 Latest Exam Testking practice dumps and concentrate on your study immediately.
In the such a brilliant era of IT industry in the 21st century competition is very fierce. Naturally, Cisco certification 200-301 Real Exam Questions exam has become a very popular exam in the IT area. More and more people register for the exam and passing the certification exam is also those ambitious IT professionals' dream.
Cisco 200-301 Real Exam Questions - It costs both time and money.
The 200-301 Real Exam Questions training pdf provided by Goldmile-Infobiz is really the best reference material you can get from anywhere. The experts of Goldmile-Infobiz are trying their best to develop and research the high quality and 200-301 Real Exam Questions exam preparation material to help you strengthen technical job skills. When you complete your payment, you will receive an email attached with 200-301 Real Exam Questions practice pdf, then you can instantly download it and install on your phone or computer for study. The high efficiency preparation by 200-301 Real Exam Questions exam dumps can ensure you 100% pass with ease.
You can totally rely on us! We never concoct any praise but show our capacity by the efficiency and profession of our 200-301 Real Exam Questions practice materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Our online test engine will improve your ability to solve the difficulty of Microsoft PL-400 real questions and get used to the atmosphere of the formal test. Microsoft SC-100 - Believe us and if you purchase our product it is very worthy. If you find you are extra taxed please tell us in time before purchasing our Cisco 200-301 reliable Study Guide materials. Now I am going to introduce you the PDF version of Huawei H28-315_V1.0 test braindumps which are very convenient. We give customers the privileges to check the content of our PMI PMP real dumps before placing orders.
Updated: May 28, 2022