The 200-301 Real Test Question learning materials are of high quality, mainly reflected in the adoption rate. As for our 200-301 Real Test Question exam question, we guaranteed a higher passing rate than that of other agency. More importantly, we will promptly update our 200-301 Real Test Question quiz torrent based on the progress of the letter and send it to you. By passing the exams multiple times on practice test software, you will be able to pass the real 200-301 Real Test Question test in the first attempt. With our 200-301 Real Test Question practice test software, you can simply assess yourself by going through the 200-301 Real Test Question practice tests. If you opting for this 200-301 Real Test Question study engine, it will be a shear investment.
CCNA 200-301 We have accommodating group offering help 24/7.
CCNA 200-301 Real Test Question - Cisco Certified Network Associate Exam Do not lose the wonderful chance to advance with times. Up to now our 200-301 Test Pattern real exam materials become the bible of practice material of this industry. Ten years have gone, and three versions have been made for your reference.
Therefore, you are able to get hang of the essential points in a shorter time compared to those who are not willing to use our 200-301 Real Test Question exam torrent. We guarantee that after purchasing our 200-301 Real Test Question exam torrent, we will deliver the product to you as soon as possible within ten minutes. So you don’t need to wait for a long time and worry about the delivery time or any delay.
Cisco 200-301 Real Test Question - The first one is downloading efficiency.
Did you often feel helpless and confused during the preparation of the 200-301 Real Test Question exam? Do you want to find an expert to help but feel bad about the expensive tutoring costs? Don't worry. Our 200-301 Real Test Question exam questions can help you to solve all the problems. Our 200-301 Real Test Question study material always regards helping students to pass the exam as it is own mission. And we have successfully helped numerous of the candidates pass their exams.
And they are the masterpieces of processional expertise these area with reasonable prices. Besides, they are high efficient for passing rate is between 98 to 100 percent, so they can help you save time and cut down additional time to focus on the 200-301 Real Test Question actual exam review only.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
In addition to high quality and high efficiency of our ASQ CMQ-OE exam questions, considerate service is also a big advantage of our company. As a representative of clientele orientation, we promise if you fail the practice exam after buying our Fortinet NSE8_812 training quiz, we will give your compensatory money full back. If you want to pass MSSC CLT exam at first attempt, MSSC CLT exam dumps is your best choice. SAP C_TS4FI_2023 - There is no doubt that you can get a great grade. APICS CSCP-KR - We also provide a 100% refund policy for all users who purchase our questions.
Updated: May 28, 2022