Goldmile-Infobiz's Cisco 200-301 Reliable Study Plan exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of Goldmile-Infobiz, you can prepare for the exam without stress and anxiety. Hence, if you need help to get certified, you are in the right place. Goldmile-Infobiz offers the most comprehensive and updated braindumps for Cisco’s certifications. You should believe that you can pass the exam easily , too.
CCNA 200-301 They will mitigate your chance of losing.
Questions and answers are available to download immediately after you purchased our 200-301 - Cisco Certified Network Associate Exam Reliable Study Plan dumps pdf. At the same time, if you have problems with downloading and installing, Cisco Certified Network Associate Exam torrent prep also has dedicated staff that can provide you with remote online guidance. In order to allow you to use our products with confidence, Exam 200-301 Simulator Online test guide provide you with a 100% pass rate guarantee.
Here choosing PayPal doesn't need to have a PayPal. In fact here you should have credit card. If you click PayPal payment, it will automatically transfer to credit card payment for 200-301 Reliable Study Plan exam test engine.
Cisco 200-301 Reliable Study Plan - And we have become a popular brand in this field.
As a market leader, our company is able to attract quality staffs on our 200-301 Reliable Study Plan exam materials , it actively seeks out those who are energetic, persistent, and professional to various 200-301 Reliable Study Plan certificate and good communicator. And we believe that the key of our company's success is its people, skills, and experience on 200-301 Reliable Study Plan study guide. Over 50% of the account executives and directors have been with the Group for more than ten years. We have strong strenght to lead you to success!
For many people, it’s no panic passing the 200-301 Reliable Study Plan exam in a short time. Luckily enough，as a professional company in the field of 200-301 Reliable Study Plan practice questions ,our products will revolutionize the issue.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
VMware 2V0-13.25 - When you buy things online, you must ensure the security of online purchasing, otherwise your rights will be harmed. The most attraction aspect is that our high pass rate of our Microsoft MS-900-KR study materials as 98% to 100%. There are many advantages of our SAP C_ABAPD_2507 question torrent that we are happy to introduce you and you can pass the exam for sure. Time and tide wait for no man, if you want to save time, please try to use our APICS CSCP preparation exam, it will cherish every minute of you and it will help you to create your life value. Carefully testing and producing to match the certified quality standards of Linux Foundation KCSA exam materials, we have made specific statistic researches on the Linux Foundation KCSA practice materials.
Updated: May 28, 2022