I strongly believe that you can feel the sincerity and honesty of our company, since we are confident enough to give our customers a chance to test our 200-301 Study Questions Ebook preparation materials for free before making their decision. and you will find out the unique charm of our 200-301 Study Questions Ebook actual exam. In order to let you have a general idea about our 200-301 Study Questions Ebook study engine, we have prepared the free demo in our website. The Cisco 200-301 Study Questions Ebook exam questions aid its customers with updated and comprehensive information in an innovative style. The 200-301 Study Questions Ebook exam simulator plays a vital role in increasing your knowledge for exam. It is a virtual certainty that our 200-301 Study Questions Ebook actual exam is high efficient with passing rate up to 98 percent and so on.
CCNA 200-301 You will like the software version.
Our 200-301 - Cisco Certified Network Associate Exam Study Questions Ebook study guide may not be as famous as other brands for the time being, but we can assure you that we won't lose out on quality. It is believed that through comparative analysis, users will be able to choose the most satisfactory Reliable Test 200-301 Dumps Materials test guide. With the increasing marketization, the product experience marketing has been praised by the consumer market and the industry.
And this version also helps establish the confidence of the candidates when they attend the 200-301 Study Questions Ebook exam after practicing. Because of the different habits and personal devices, requirements for the version of our 200-301 Study Questions Ebook exam questions vary from person to person. To address this issue, our 200-301 Study Questions Ebook actual exam offers three different versions for users to choose from.
Cisco 200-301 Study Questions Ebook - This certification gives us more opportunities.
Many exam candidates feel hampered by the shortage of effective 200-301 Study Questions Ebook preparation quiz, and the thick books and similar materials causing burden for you. Serving as indispensable choices on your way of achieving success especially during this 200-301 Study Questions Ebook exam, more than 98 percent of candidates pass the exam with our 200-301 Study Questions Ebook training guide and all of former candidates made measurable advance and improvement.
Therefore, modern society is more and more pursuing efficient life, and our 200-301 Study Questions Ebook exam materials are the product of this era, which conforms to the development trend of the whole era. It seems that we have been in a state of study and examination since we can remember, and we have experienced countless tests, including the qualification examinations we now face.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
The PDF version of Fortinet NSE8_812 test questions can be printed out to facilitate your learning anytime, anywhere, as well as your own priorities. Microsoft SC-401 - If you make up your mind, choose us! Our Amazon AWS-Developer-KR exam braindumps are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. CompTIA N10-009 - Of course, their service attitude is definitely worthy of your praise. Microsoft AZ-400 - In fact, all three versions contain the same questions and answers.
Updated: May 28, 2022