200-301 Study Questions Ppt exam is an exam concerned by lots of internet professionals. Close to 100% passing rate is the best gift that our customers give us. We also hope our 200-301 Study Questions Ppt exam materials can help more and more ambitious people pass the 200-301 Study Questions Ppt exam. Check also the feedback of our clients to know how our products proved helpful in passing the exam. Goldmile-Infobiz ensures your success with money back assurance. Our 200-301 Study Questions Ppt study materials are constantly updated by our experts and improved according to the changing standards of the actual examination standards.
CCNA 200-301 The knowledge you have learned is priceless.
CCNA 200-301 Study Questions Ppt - Cisco Certified Network Associate Exam Where there is a will, there is a way. With the help of our hardworking experts, our Accurate 200-301 Study Material exam braindumps have been on the front-front of this industry and help exam candidates around the world win in valuable time. With years of experience dealing with exam, they have thorough grasp of knowledge which appears clearly in our Accurate 200-301 Study Material actual exam.
In your real exam, you must answer all questions in limited time. So you need our timer to help you on 200-301 Study Questions Ppt practice guide. Our timer is placed on the upper right of the page.
Cisco 200-301 Study Questions Ppt - Goldmile-Infobiz exists for your success.
If you feel that you always suffer from procrastination and cannot make full use of your spare time, maybe our 200-301 Study Questions Ppt study materials can help you solve your problem. We are willing to recommend you to try the 200-301 Study Questions Ppt learning guide from our company. Our products are high quality and efficiency test tools for all people with three versions which satisfy all your needs. If you buy our 200-301 Study Questions Ppt preparation questions, you can use our 200-301 Study Questions Ppt practice engine for study in anytime and anywhere.
Stop hesitating. If you want to experience our exam dumps, hurry to click Goldmile-Infobiz to try our pdf real questions and answers.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
Elaborately designed and developed CompTIA 220-1101 test guide as well as good learning support services are the key to assisting our customers to realize their dreams. Would you like to distinguish yourself in IT industry? And would you like to get much more professional recognition? Come on and sign up for Cisco SAP C-BCBTM-2509 certification exam to further improve your skills. Therefore, we should formulate a set of high efficient study plan to make the CertNexus AIP-210 exam dumps easier to operate. The IIA IIA-CIA-Part3-KR exam software designed by our Goldmile-Infobiz will help you master IIA IIA-CIA-Part3-KR exam skills. What’s more, you can have a visit of our website that provides you more detailed information about the Esri EAEP_2025 guide torrent.
Updated: May 28, 2022