Easily being got across by exam whichever level you are, our 200-301 Valid Exam Braindumps simulating questions have won worldwide praise and acceptance as a result. They are 100 percent guaranteed practice materials. Though at first a lot of our new customers didn't believe our 200-301 Valid Exam Braindumps exam questions, but they have became the supporters now. Because our Goldmile-Infobiz experienced technicians have provided efficient way for you to easily get 200-301 Valid Exam Braindumps exam certification. We constantly update test simulation software in order to help you who are preparing for 200-301 Valid Exam Braindumps exam by efforts to get the satisfactory results. And with the simpilied content of our 200-301 Valid Exam Braindumps practice questions, you can have a wonderful study experience as well.
CCNA 200-301 Sharp tools make good work.
200-301 - Cisco Certified Network Associate Exam Valid Exam Braindumps exam guide has a first-class service team to provide you with 24-hour efficient online services. Our New 200-301 Exam Format free dumps are applied to all level of candidates and ensure you get high passing score in their first try. Our New 200-301 Exam Format vce braindumps will boost your confidence for taking the actual test because the pass rate of our preparation materials almost reach to 98%.
Finding a good paying job is available for you. Good chances are few. Please follow your heart.
Cisco 200-301 Valid Exam Braindumps - We have 24/7 Service Online Support services.
Goldmile-Infobiz is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase Goldmile-Infobiz's products, Goldmile-Infobiz is proved to be the best website to provide the source of information about certification exam. The product of Goldmile-Infobiz is a very reliable training tool for you. The answers of the exam exercises provided by Goldmile-Infobiz is very accurate. Our Goldmile-Infobiz's senior experts are continuing to enhance the quality of our training materials.
After you pay for our 200-301 Valid Exam Braindumps exam material online, you will get the link to download it in only 5 to 10 minutes. You don't have to wait a long time to start your preparation for the 200-301 Valid Exam Braindumps exam.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Juniper JN0-650 - Of course, there is no exception in the competitive IT industry. It depends on the client to choose the version they favor to learn our Fortinet NSE6_SDW_AD-7.6 study materials. In Goldmile-Infobiz's website you can free download study guide, some exercises and answers about Cisco certification Amazon Data-Engineer-Associate exam as an attempt. So why still hesitate? Act now, join us, and buy our Microsoft MS-700-KR study materials. We promise that if you have used Goldmile-Infobiz's latest Cisco certification SAP C_S4PM2_2507 exam practice questions and answers exam but fail to pass the exam, Goldmile-Infobiz will give you a full refund.
Updated: May 28, 2022