You can free download part of practice questions and answers about Cisco certification 200-301 Valid Exam Sims exam to test our quality. Goldmile-Infobiz can help you 100% pass Cisco certification 200-301 Valid Exam Sims exam, and if you carelessly fail to pass Cisco certification 200-301 Valid Exam Sims exam, we will guarantee a full refund for you. Because our 200-301 Valid Exam Sims actual exam help exam cannonades pass the exam with rate up to 98 to 100 percent. It encourages us to focus more on the quality and usefulness of our 200-301 Valid Exam Sims exam questions in the future. Cisco certification 200-301 Valid Exam Sims exam is a test of IT professional knowledge.
CCNA 200-301 Goldmile-Infobiz will help you achieve your dream.
CCNA 200-301 Valid Exam Sims - Cisco Certified Network Associate Exam Facts proved that if you do not have the certification, you will be washed out by the society. Do not spend too much time and money, as long as you have Goldmile-Infobiz learning materials you will easily pass the exam. In order to help you more Goldmile-Infobiz the Cisco Latest Test 200-301 Collection Materials exam eliminate tension of the candidates on the Internet.
Originating the 200-301 Valid Exam Sims exam questions of our company from tenets of offering the most reliable backup for customers, and outstanding results have captured exam candidates’ heart for their functions. Our 200-301 Valid Exam Sims practice materials can be subdivided into three versions. All those versions of usage has been well-accepted by them.
Cisco 200-301 Valid Exam Sims - We guarantee you 100% to pass the exam.
Learning knowledge is not only to increase the knowledge reserve, but also to understand how to apply it, and to carry out the theories and principles that have been learned into the specific answer environment. The Cisco Certified Network Associate Exam exam dumps are designed efficiently and pointedly, so that users can check their learning effects in a timely manner after completing a section. Good practice on the success rate of 200-301 Valid Exam Sims quiz guide is not fully indicate that you have mastered knowledge is skilled, therefore, the 200-301 Valid Exam Sims test material let the user consolidate learning content as many times as possible, although the practice seems very boring, but it can achieve the result of good consolidate knowledge.
But they do not know which to believe. Here, I have to recommend Goldmile-Infobiz's Cisco 200-301 Valid Exam Sims exam training materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
After the clients pay successfully for the ServiceNow CSA certification material the system will send the products to the clients by the mails. Huawei H13-624_V5.5 - This is indeed true, no doubt, do not consider, act now. If you have tried on our HP HPE3-CL08 exam questions, you may find that our HP HPE3-CL08 study materials occupy little running memory. Fortinet NSE4_FGT_AD-7.6 - Within the last few decades, IT got a lot of publicity and it has been a necessary and desirable part of modern life. Salesforce Salesforce-MuleSoft-Developer-I - All contents are passing rigid inspection.
Updated: May 28, 2022