The clients only need 20-30 hours to learn the 350-401 Download Free Dumps exam questions and prepare for the test. Many people may complain that we have to prepare for the 350-401 Download Free Dumps test but on the other side they have to spend most of their time on their most important things such as their jobs, learning and families. But if you buy our 350-401 Download Free Dumps study guide you can both do your most important thing well and pass the test easily because the preparation for the test costs you little time and energy. And with 350-401 Download Free Dumps learning question, you will no longer need any other review materials, because our study materials already contain all the important test sites. At the same time, 350-401 Download Free Dumps test prep helps you to master the knowledge in the course of the practice. There are some loopholes or systemic problems in the use of a product, which is why a lot of online products are maintained for a very late period.
CCNP Enterprise 350-401 It can help you to pass the exam.
Now, I am proud to tell you that our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Download Free Dumps study dumps are definitely the best choice for those who have been yearning for success but without enough time to put into it. After using our 350-401 Exam Questions And Answers exam materials, they all passed the exam easily and thought it was a valuable learning experience. Learn and practice our 350-401 Exam Questions And Answers exam questions during the preparation of the exam, it will answer all your doubts.
We can assure you that you will get the latest version of our 350-401 Download Free Dumps training materials for free from our company in the whole year after payment. For we promise to give all of our customers one year free updates of our 350-401 Download Free Dumps exam questions and we update our 350-401 Download Free Dumps study guide fast and constantly. Do not miss the opportunity to buy the best 350-401 Download Free Dumps preparation questions in the international market which will also help you to advance with the times.
Cisco 350-401 Download Free Dumps - Perhaps you do not understand.
Revision of your 350-401 Download Free Dumps exam learning is as essential as the preparation. For that purpose, 350-401 Download Free Dumps exam dumps contains specially created real exam like practice questions and answers. They are in fact meant to provide you the opportunity to revise your learning and overcome your 350-401 Download Free Dumps exam fear by repeating the practice tests as many times as you can. Preparation for 350-401 Download Free Dumps exam using our 350-401 Download Free Dumps exam materials are sure to help you obtain your targeted percentage too.
As long as you are convenient, you can choose to use a computer to learn, you can also choose to use mobile phone learning. No matter where you are, you can choose your favorite equipment to study our 350-401 Download Free Dumps learning materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
By using our updated EMC D-SF-A-01 products, you will be able to get reliable and relative EMC D-SF-A-01 exam prep questions, so you can pass the exam easily. Watch carefully you will find that more and more people are willing to invest time and energy on the ITIL ITIL4-DPI exam, because the exam is not achieved overnight, so many people are trying to find a suitable way. Our experts have worked hard for several years to formulate CompTIA CAS-005 exam braindumps for all examiners. SAP C_TS4FI_2023 - Our users are willing to volunteer for us. In fact, you just need spend 20~30h effective learning time if you match Microsoft SC-401 guide dumps and listen to our sincere suggestions.
Updated: May 28, 2022