With the simulation test, all of our customers will get accustomed to the 350-401 Exam Cram Pdf exam easily, and get rid of bad habits, which may influence your performance in the real 350-401 Exam Cram Pdf exam. In addition, the mode of 350-401 Exam Cram Pdf learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 350-401 Exam Cram Pdf test questions would be absorbed, which is time-saving and high-efficient. But have you tried it? We often hear this, “Goldmile-Infobiz questions and answers are really good reference materials, thanks to the dumps, I pass my exam successfully.” Goldmile-Infobiz has been favourably commented by the people who used its questions and answers. This is because it can really help students to save a lot of time, and ensure that everyone pass the exam successfully. In this high-speed world, a waste of time is equal to a waste of money.
CCNP Enterprise 350-401 We sincerely offer you 24/7 online service.
CCNP Enterprise 350-401 Exam Cram Pdf - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) I believe that people want to have good prospects of career whatever industry they work in. If only you open it in the environment with the network for the first time you can use our Exam 350-401 Tutorial training materials in the off-line condition later. It depends on the client to choose the version they favor to learn our Exam 350-401 Tutorial study materials.
In Goldmile-Infobiz's website you can free download study guide, some exercises and answers about Cisco certification 350-401 Exam Cram Pdf exam as an attempt.
Cisco 350-401 Exam Cram Pdf - Within a year, we provide free updates.
Our 350-401 Exam Cram Pdf test braindumps are in the leading position in the editorial market, and our advanced operating system for 350-401 Exam Cram Pdf latest exam torrent has won wide recognition. As long as you choose our 350-401 Exam Cram Pdf exam questions and pay successfully, you do not have to worry about receiving our learning materials for a long time. We assure you that you only need to wait 5-10 minutes and you will receive our 350-401 Exam Cram Pdf exam questions which are sent by our system. When you start learning, you will find a lot of small buttons, which are designed carefully. You can choose different ways of operation according to your learning habits to help you learn effectively.
They used their knowledge and experience as well as the ever-changing IT industry to produce the material. The effect of Goldmile-Infobiz's Cisco 350-401 Exam Cram Pdf exam training materials is reflected particularly good by the use of the many candidates.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
You will our Scrum SAFe-Practitioner exam dumps are the best! If you are still study hard to prepare the Cisco CheckPoint 156-561 exam, you're wrong. You can also know how to contact us and what other client’s evaluations about our ACMP Global CCMP test braindumps. CIPS L4M5 - And you can pass the exam successfully. Microsoft MS-700 - If our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide torrent can’t help you pass the exam, we will refund you in full.
Updated: May 28, 2022