When you pass the 350-401 Exam Dumps Free exam which is well recognized wherever you are in any field, then acquire the 350-401 Exam Dumps Free certificate, the door of your new career will be open for you and your future is bright and hopeful. Our 350-401 Exam Dumps Free guide torrent will be your best assistant to help you gain your certificate. It is a truth well-known to all around the world that no pains and no gains. But our 350-401 Exam Dumps Free exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%. It is common in modern society that many people who are more knowledgeable and capable than others finally lost some good opportunities for development because they didn’t obtain the 350-401 Exam Dumps Free certification. You don't need to worry about wasting your precious time but failing to get the 350-401 Exam Dumps Free certification.
So our 350-401 Exam Dumps Free study questions are their best choice.
Once our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Dumps Free learning materials are updated, we will automatically send you the latest information about our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Dumps Free exam question. And our online test engine and the windows software of the 350-401 Latest Exam Bootcamp Materials guide materials are designed more carefully. During our researching and developing, we always obey the principles of conciseness and exquisiteness.
Nowadays, all of us are living a fast-paced life and we have to deal with things with high-efficience. We also develope our 350-401 Exam Dumps Free practice materials to be more convenient and easy for our customers to apply and use. The most advanced operation system in our 350-401 Exam Dumps Free exam questions which can assure you the fastest delivery speed, and your personal information will be encrypted automatically by our operation system.
Cisco 350-401 Exam Dumps Free - While it is not truth.
Cisco 350-401 Exam Dumps Free authentication certificate is the dream IT certificate of many people. Cisco certification 350-401 Exam Dumps Free exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. Goldmile-Infobiz is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification 350-401 Exam Dumps Free exam related knowledge. If you are interested in Goldmile-Infobiz, you can first free download part of Goldmile-Infobiz's Cisco certification 350-401 Exam Dumps Free exam exercises and answers on the Internet as a try.
They give users access to information and exam, offering simulative testing environment when you participate it like in the classroom. And if you are afraid of the lack experience of the exam, our 350-401 Exam Dumps Free practice engine will be your good choice.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
GIAC GREM - Please select Goldmile-Infobiz, you will be the next successful IT person. PRINCE2 PRINCE2-Foundation - If you are interest in it, you can buy it right now. Amazon SAA-C03 study materials including the official Cisco Amazon SAA-C03 certification training courses, Cisco Amazon SAA-C03 self-paced training guide, Amazon SAA-C03 exam Goldmile-Infobiz and practice, Amazon SAA-C03 online exam Amazon SAA-C03 study guide. Fortinet NSE7_CDS_AR-7.6 - All those versions of usage has been well-accepted by them. Fortinet FCSS_NST_SE-7.4 - With it, you will be brimming with confidence, fully to do the exam preparation.
Updated: May 28, 2022