With 350-401 Exam Simulator Online practice materials, you don't need to spend a lot of time and effort on reviewing and preparing. For everyone, time is precious. Office workers and mothers are very busy at work and home; students may have studies or other things. Once it is time to submit your exercises, the system of the 350-401 Exam Simulator Online preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. Hence 350-401 Exam Simulator Online dumps are a special feast for all the exam takers and sure to bring them not only 350-401 Exam Simulator Online exam success but also maximum score.
Our 350-401 Exam Simulator Online practice quiz is unique in the market.
Our reliable 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Simulator Online question dumps are developed by our experts who have rich experience in the fields. All intricate points of our 350-401 Lab Questions study guide will not be challenging anymore. They are harbingers of successful outcomes.
Secondly, our 350-401 Exam Simulator Online exam questions will spare no effort to perfect after-sales services. Thirdly countless demonstration and customer feedback suggest that our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question can help them get the certification as soon as possible, thus becoming the elite, getting a promotion and a raise and so forth. We will provide high quality assurance of 350-401 Exam Simulator Online exam questions for our customers with dedication to ensure that we can develop a friendly and sustainable relationship.
The hit rate of Cisco 350-401 Exam Simulator Online study engine is very high.
Goldmile-Infobiz is a convenient website to provide service for many of the candidates participating in the IT certification exams. A lot of candidates who choose to use the Goldmile-Infobiz's product have passed IT certification exams for only one time. And from the feedback of them, helps from Goldmile-Infobiz are proved to be effective. Goldmile-Infobiz's expert team is a large team composed of senior IT professionals. And they take advantage of their expertise and abundant experience to come up with the useful training materials about 350-401 Exam Simulator Online certification exam. Goldmile-Infobiz's simulation test software and related questions of 350-401 Exam Simulator Online certification exam are produced by the analysis of 350-401 Exam Simulator Online exam outline, and they can definitely help you pass your first time to participate in 350-401 Exam Simulator Online certification exam.
By devoting in this area so many years, we are omnipotent to solve the problems about the 350-401 Exam Simulator Online learning questions with stalwart confidence. we can claim that only studing our 350-401 Exam Simulator Online study guide for 20 to 30 hours, then you will pass the exam for sure.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Goldmile-Infobiz is a website for Cisco certification Microsoft SC-401 exam to provide a short-term effective training. Learning with our ASQ CSSBB learning guide is quiet a simple thing, but some problems might emerge during your process of ASQ CSSBB exam materials or buying. Generally, if you use Goldmile-Infobiz's targeted review questions, you can 100% pass Cisco certification AVIXA CTS-I exam. Lpi 101-500 - These advantages help you get a thorough look in details. The our Goldmile-Infobiz Cisco CIPS L4M6 exam training materials, the verified exam, these questions and answers reflect the professional and practical experience of Goldmile-Infobiz.
Updated: May 28, 2022