Quick purchase process, free demos and various versions and high quality 350-401 Free Learning Cram real questions are al features of our advantageous practice materials. With passing rate up to 98 to 100 percent, you will get through the 350-401 Free Learning Cram practice exam with ease. So they can help you save time and cut down additional time to focus on the 350-401 Free Learning Cram practice exam review only. You just need to effectively review and pass 350-401 Free Learning Cram exam successfully. The earlier you get 350-401 Free Learning Cram exam certification, the more helpful for you to have better development in IT industry. Passing the 350-401 Free Learning Cram exam requires many abilities of you: personal ability, efficient practice materials, as well as a small touch of luck.
CCNP Enterprise 350-401 Just add it to your cart.
However, the appearance of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Learning Cram certification materials will solve your question and change your impression of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Learning Cram certification exam. You can instantly download the Latest 350-401 Test Camp test engine and install it on your PDF reader, laptop or phone, then you can study it in the comfort of your home or while at office. Our Latest 350-401 Test Camp test engine allows you to study anytime and anywhere.
We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the 350-401 Free Learning Cram study materials, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our 350-401 Free Learning Cram study materials well. We believe our perfect service will make you feel comfortable when you are preparing for your exam.
Cisco 350-401 Free Learning Cram - People’s tastes also vary a lot.
Your selection on the riht tool to help your pass the 350-401 Free Learning Cram exam and get the according certification matters a lot for the right 350-401 Free Learning Cram exam braindumps will spread you a lot of time and efforts. Our 350-401 Free Learning Cram study guide is the most reliable and popular exam product in the marcket for we only sell the latest 350-401 Free Learning Cram practice engine to our clients and you can have a free trial before your purchase.
Professional research data is our online service and it contains simulation training examination and practice questions and answers about Cisco certification 350-401 Free Learning Cram exam. Goldmile-Infobiz's after-sales service is not only to provide the latest exam practice questions and answers and dynamic news about Cisco 350-401 Free Learning Cram certification, but also constantly updated exam practice questions and answers and binding.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Our Amazon CLF-C02-KR study guide can release your stress of preparation for the test. Salesforce MCE-Admn-201 - Besides, exercises we provide are very close to the real exam questions, almost the same. As long as you follow with our Palo Alto Networks XSIAM-Engineer study guide, you are doomed to achieve your success. Goldmile-Infobiz's Cisco certification Appian ACD201 exam testing exercises is very similar with real exam questions. Microsoft GH-200 exam practice software allows you to practice on real Microsoft GH-200 questions.
Updated: May 28, 2022