The content of our 350-401 Free Sample Questions learning guide is definitely the most abundant. Before you go to the exam, our 350-401 Free Sample Questions exam questions can provide you with the simulating exam environment. Our 350-401 Free Sample Questions training prep was produced by many experts, and the content was very rich. The last but not least we have professional groups providing guidance in terms of download and installment remotely. When you decide to pass the 350-401 Free Sample Questions exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. Our 350-401 Free Sample Questions study materials will really be your friend and give you the help you need most.
CCNP Enterprise 350-401 God will help those who help themselves.
Just visit our website and try our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Sample Questions exam questions, then you will find what you need. So don't waste time and come to buy our New 350-401 Exam Blueprint study braindumps. As you can see, our New 350-401 Exam Blueprint practice exam will not occupy too much time.
350-401 Free Sample Questions test questions have so many advantages that basically meet all the requirements of the user. If you have good comments or suggestions during the trial period, you can also give us feedback in a timely manner. Our study materials will give you a benefit as Thanks, we do it all for the benefits of the user.
Cisco 350-401 Free Sample Questions - In fact, we never cheat on customers.
What was your original intention of choosing a product? I believe that you must have something you want to get. 350-401 Free Sample Questions exam materials allow you to have greater protection on your dreams. This is due to the high passing rate of our 350-401 Free Sample Questions study questions which is high as 98% to 100%. And our 350-401 Free Sample Questions exam questions own a high quality which is easy to understand and practice. At the same time, our price is charming. Just come and buy it!
As long as you need the exam, we can update the Cisco certification 350-401 Free Sample Questions exam training materials to meet your examination needs. Goldmile-Infobiz's training materials contain many practice questions and answers about Cisco 350-401 Free Sample Questions and they can 100% ensure you pass Cisco 350-401 Free Sample Questions exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
The series of Fortinet FCP_FAZ_AN-7.6 measures we have taken is also to allow you to have the most professional products and the most professional services. Now passing Cisco certification Microsoft GH-100 exam is not easy, so choosing a good training tool is a guarantee of success. NCARB PDD - For the convenience of users, our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn materials will be timely updated information associated with the qualification of the home page, so users can reduce the time they spend on the Internet, blindly to find information. Through the Cisco certification Huawei H12-611_V2.0 exam method has a lot of kinds, spend a lot of time and energy to review the Cisco certification Huawei H12-611_V2.0 exam related professional knowledge is a kind of method, through a small amount of time and money Goldmile-Infobiz choose to use the pertinence training and exercises is also a kind of method. Esri EAEP2201 - This kind of learning method is very convenient for the user, especially in the time of our fast pace to get Cisco certification.
Updated: May 28, 2022