Although some of the hard copy materials contain mock examination papers, they do not have the automatic timekeeping system. Therefore, it is difficult for them to bring the students into a real test state. With 350-401 Latest Exam Answers exam guide, you can perform the same computer operations as the real exam, completely taking you into the state of the actual exam, which will help you to predict the problems that may occur during the exam, and let you familiarize yourself with the exam operation in advance and avoid rushing during exams. Meanwhile, our 350-401 Latest Exam Answers training materials are demonstrably high effective to help you get the essence of the knowledge which was convoluted. You will find that passing the 350-401 Latest Exam Answers exam is as easy as pie. What are you still hesitating for? Hurry to buy our 350-401 Latest Exam Answers learning engine now!
CCNP Enterprise 350-401 Just try and you will love them.
And many of our cutomers use our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Exam Answers exam questions as their exam assistant and establish a long cooperation with us. If you want to pass the exam in the shortest time, our study materials can help you achieve this dream. 350-401 Latest Practice Test Fee learning quiz according to your specific circumstances, for you to develop a suitable schedule and learning materials, so that you can prepare in the shortest possible time to pass the exam needs everything.
Provided that you lose your exam with our 350-401 Latest Exam Answers exam questions unfortunately, you can have full refund or switch other version for free. All the preoccupation based on your needs and all these explain our belief to help you have satisfactory and comfortable purchasing services on the 350-401 Latest Exam Answers study guide. We assume all the responsibilities our 350-401 Latest Exam Answers simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly.
Cisco 350-401 Latest Exam Answers - We sincerely serve for you any time.
In order to make all customers feel comfortable, our company will promise that we will offer the perfect and considerate service for all customers. If you buy the 350-401 Latest Exam Answers training files from our company, you will have the right to enjoy the perfect service. We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the 350-401 Latest Exam Answers learning dumps, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our 350-401 Latest Exam Answers study questions well. We believe our perfect service will make you feel comfortable when you are preparing for your exam.
All 350-401 Latest Exam Answers practice questions you should know are written in them with three versions to choose from: the PDF, the Software and the APP online. At the same time, the experts who compiled the 350-401 Latest Exam Answers learning engine are assiduously over so many years in this filed.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
In addition, the ITIL ITIL-4-Transition exam dumps system from our company can help all customers ward off network intrusion and attacks prevent information leakage, protect user machines network security. Nutanix NCP-MCA - In conclusion, a career enables you to live a fuller and safer life. For example, it will note that how much time you have used to finish the ATD CPTD study guide, and how much marks you got for your practice as well as what kind of the questions and answers you are wrong with. To fill the void, we simplify the procedures of getting way, just place your order and no need to wait for arrival of our HP HPE6-A87 exam dumps or make reservation in case people get them all, our practice materials can be obtained with five minutes. We can make sure that all employees in our company have wide experience and advanced technologies in designing the SAP C_S4PM2_2507 study dump.
Updated: May 28, 2022